How to mend ... Help Settings Please

what are the basic 2002 aprilla sr50 scooter carb settings?

I got a friends sr50 running after much neglect but i need to know the set up details for the carb because it ... [Read more]

What are the settings for a Sachs Dolmar 113 chainsaw?

Have a Sachs Dolmar 113 chainsaw which is difficult to start. What are the proper settings for the 3 screws on... [Read more]

No Volume on my Freestyle 70?

I have hardly any volume from the caller end on my BT Freestyle 70. They can hear me fine but I cannot hear th... [Read more]

idesit WI101 continually drains water?

I have an old indesit WI101 washing machine and it won't fill with water - it will run water through the prewa... [Read more]

Cam belt tensioner bolt torque settings. ?

Im doing a cam belt on a 205 1.1 and was wondering what the torqure setting for the tensioner bolt is?

How can I fix my Lexmark Z12 Printer?

On installing a replacement cartridge on the Lexmark Z12, I get the following error message:- Please verify t... [Read more]

how to reset BT Verve 500 Base?

I have inherited the above phone at work, but I can't change any of the base settings as I do not have the pin... [Read more]

beko wma 520 wont work?

Can any one help my beko wma 520 machine wont work som etimes it will fill with water but thats as far as it g... [Read more]

how can i fix my frigidaire horizon 2000 washer?

Water trickles out when filling with cold water. Works fine with warm and hot settings. Nothing wrong with the... [Read more]

How to play recordings when Recorded Program list lost?

Following advice from another thread (which was received enthusiastically by dozens of other people with the s... [Read more]

Torque settings for rear wheel bearings Peugeot 806?

Torque settings for rear wheel bearings Peugeot 806 1.9 sltd 1996?

Transit gearbox torque settings?

I have to replace the rear oil seal in a 2005 RWD long wheel base transit 2.4 TD. What is the correct torqu... [Read more]

Miele W833 will not drain?

I have a Miele washing machine model W833 and it has stopped at the drain stage, i have drained it by hand and... [Read more]

Glowworm Spacesaver KFB 50 fires up without water or heat called for?

Have had the programer replaced, motorised valves are working correctly (supposedly) Immersion tank thermostat... [Read more]

adjustments?

how do i adjust my high and low settings so as my mac 110 doesnt cut out when you apply the throttle

how do i adjust my hedge trimmer?

my mcculloch mh 542p hedge trimmer is running rough and wont tickover how do i set the adjustment to correct s... [Read more]

timing belt settings for a 1996 Peugeot 106 diesel engine?

I need the timing belt settings for the 1595 Peugeot 106 1996 Diesel, can anyone help?

valve settings 13hp techumsh enduro?

what are the valve settings fo a 13hp techumsh (enduro)

how to recover password?

i have forgotten password to enter the menu settings on the box super can anyone help

laptop into stby mode?

I have just installed a new HDD into my Dell Latitude X200 and installed WinXp Pro (as previously installed) w... [Read more]