How to mend ... Drum Belt Place

hotpoint aquarius TDL52 Tumble Dryer banging?

I have had this machine for approx 4 years with no problems. Last week whilst drying a loud banging noise star... [Read more]

Indesit WG1033T Not turning?

I thought I'd post a question before I called someone to look at my washer to see if there is anything else I ... [Read more]

Indesit Condenser Dryer IS70C- Drum not turning?

Power on, water emptied. Drum won't turn. Taken top off dryer, belt is in place. If assisted drum will turn... [Read more]

Simpson MaxiDry 457 - Are you having reassembly problems?

Simpson MaxiDry 457 - The complete guide to disassembly & reassembly. After having spent nearly a whole wor... [Read more]

Drum not turning on my Hoover Nextra HNF3157?

Hi, The drum doesn't turn on this machine, it fills with water and seems to complete the wash cyclye emtying t... [Read more]

Hotpoint Aquarius WMA58 Belt slipping?

My hotpoint started to make a very loud noise when spinning when I next used the machine it went through a was... [Read more]

How can I fix my Hoover Performa 1100?

The drum isn't turning at all. The belt is still in place but the motor doesn't seem to be do anything. Will i... [Read more]

Zanussi Aquacycle 1050 drum not rotating?

Our washing machine a Zanussi Aquacycle 1050 is not going through the wash cycle. It powers up and the water g... [Read more]

how do i fit a drum belt to a creda exel T602CW?

took the side panel off and belt was snapped but dont have a clue how to get a new one round the drum. Any ide... [Read more]

Belt rotaion ZANUSSI TC 470?

The old drum belt having broken was replaced and then we found it did not dry the clothers, it was only gett... [Read more]

Hotpoint WD71 - has the bearing gone?

On Christmas Eve (typical!) I went to get my washing out and was faced with a room full of stinking smoke. ... [Read more]

Drum will not spin or turn, even by hand?

I have a Zanussi F1245 W. The drum does not turn at all, and I used to be able to turn it freely by hand. ... [Read more]

Indesit WI 101 drive belt keeps popping off. What to do?

Help! We have an Indesit WI 101 washing machine (about two years old) and recently it decided to stop worki... [Read more]

I too have a Hotpoint washer that will not spin?

It's a Hotpoint Ultima Extra WMA63. I thought it may be a blocked pump - it agitates and seems to start to ram... [Read more]

Replacing maytag dryer belt model DE4910ACW?

There is so much slack when we try to replace the belt. The only instructions we can find are to place the be... [Read more]

How can I get a new belt onto a Hotpoint WMA10 washing machine ?

I'm trying to get a new belt onto a Hotpoint WMA10 washing machine but there seems no possible way to get it o... [Read more]

HOW CAN I REMOVE THE REAR PULLEY AND FIT NEW BEARINGS?

INDESIT 822R WASHING MACHINE. THE DRIVE BELT HAS GONE SLACK WHICH COULD INDICATE THAT THE MAIN DRUM BEARING HA... [Read more]

How can I put a new drive belt around the drum of my Hotpoint 9316?

Hi there, I'm racking my brains trying to work out how to get a new drive belt around the drum of my Hotpoi... [Read more]

How do I get my Hotpoint Aquarius 900 drum to move during cycle?

My Aquarius 900 WM61 drum will not churn / rotate during cycle. Cycle moves through, and internal switch "cli... [Read more]

How do I change drum belt on Hotpoint 9326?

I have a Hotpoint Reversomatic 9326 Aquarius drying System electric european style tumble dryer. It is about 1... [Read more]