How to mend ... Control Panel Ideas

what is wrong with my central locking?

I have a 2001 vw golf, when i use the remote control to open all the doors it will only open the driver door. ... [Read more]

How to take the front panel off a Bosch WTA 3100?

The timer control dial is not turning the clock. I think I need to take off the front panel to replace control... [Read more]

alarms securit 700L?

securit 700L alarm red led's on the PIR sensors keep flashing continuously and LED's on control panel flash wh... [Read more]

worcester bosch 28si II?

recently had a gas engineer out as stopped working altogether with light flashing approx 1 per sec used reset ... [Read more]

please help worcester 28 si II combi?

recently had a gas engineer out as stopped working altogether with light flashing approx 1 per sec used reset ... [Read more]

Peugot 206 P Reg electric windows?

We have a P reg 206 on which the front passenger electric window has developed a fault. It will wind down on t... [Read more]

I have a problem with my Melcom ST6100 alarm control panel?

I have recently installed a melcom ST6100 alram control panel, however whe I attach the alarm box the tamper l... [Read more]

Glow worm 18hxi?

Green light comes on & there is a temperature reading but the green light then goes off again, there is no fau... [Read more]

Honeywell Accenta Control Panel - No 12v supply - Can I fix?

Hi, I recently damaged an alarm cable. The cable was replaced but on re-powering the control panel there seem... [Read more]

FL828 control switch?

At the end of a wash cycle the light in the front panel wont go out,and it sounds like the timer is still runn... [Read more]

Control panel - Kitchenaid KUDS01FL?

When I push the button for any cycle on the touch pad (control panel) the cancel button lights up, but not the... [Read more]

Changing the timer on a White Night CL 767 SV Condenser dryer?

Dryer was leaking and timer not going round. Stripped it down, cleaned out soggy fluff from pump housing. Iden... [Read more]

e90 error wjs1265w zanussi ?

my zanussi wjs 1265 w showed a e90 error now will not start and door will not open, control panel will set opt... [Read more]

AEG oko lavamat 72620 showing Cd on panel?

The control panel is showing Cd on panel have fitted new door lock but is still showing same, any ideas what p... [Read more]

boiler lights, but just ticks over, IE: it won't go to full flame?

The boiler is a Radiant RS24. It lights, but stays on tickover. We've had a new pcb, limit thermostat and heat... [Read more]

Scrapping Noise on the Hotpoint vtd00?

Hi all Ive just replaced the back bearing and the belt but the machince is still scraping noises, i had to t... [Read more]

Worcester Bosch 400BF Hot Water Cutting Out?

Hi I have a problem when running hot water it is hot for a while then runs cold then back to hot the CH light ... [Read more]

Veritas R8 Plus?

Hello, I have a Veritas R8 Plus with 1 LCD control pad. We were woken this morning by the alarm going off,... [Read more]

veritas 8 keypad no power?

we have a Veritas 8 alarm, this morning it went off, I went to reset it but nothing worked, the light on the k... [Read more]

Neff oven failure?

I have replaced the element in my Neff oven but the oven is still not heating. The control panel is lit and th... [Read more]