How to mend ... Belt Ideas Better

How to repair Proline dryer SLC83 ?

Before the dryer broke down, I noticed that the drum would pause or hesitate before it turned or rotated. Sev... [Read more]

trimline 2200 belt will not turn pushed reset and checked fuse?

what else can I do. The treadmill will incline but the belt will not operate. Any ideas

Xantia 1.9 td?

After going though a large puddle at low speed and stalling in the my xantia 1.9td in the middle, I have now d... [Read more]

Vivaro f9q760 1.9 CDTI 2005?

Have set timing up on marks on belt but engine will not rev over 2000, have tried belt timing one notch each s... [Read more]

Heater playing up and slight rubbing noise from engine in Citreon Saxo 1.4 ?

It took a lot longer than normal for the heat to kick in this morning plus it kept going from hot to not so ho... [Read more]

What does Ultima CDT80 Fault Code F15 Mean?

This tumble dryer has just had drive belt replaced but comes up with F15, and appears to not be heating. An... [Read more]

What can the fault be?

The drum on my Hoover PE235 Washing Machine has stopped turning, my son has checked the filter and drive belt,... [Read more]

What's making my battery die on a peugeot 106 (96) after a week of driving?

What's making my battery die after a week of driving? I've charged the battery back up over night but then a w... [Read more]

Kenmore Progressive runs then quits - repeatedly?

My Kenmore Progressive will run fine for a few minutes then quits (light remains on). It will start again afte... [Read more]

My Oreck XL2 is spitting out dirt...what could it be?

My Oreck XL2 will not pick up. The motor is still turning the brush, but it does not pick up. When I run it th... [Read more]

vacumm cleaner belt- delta, from aldi?

Does anybody know where i can purchase a rubber belt for a vacumm cleaner the make is Delta, its an upright mo... [Read more]

Ford Mondeo 06 plate 1.8 Petrol?

Any Ideas where I can get free download of workshop Manual for 06 plate 1.8 Petrol Mondeo. Or a picture showin... [Read more]

DCO4 replace belt?

Brush not turning so have opened up machine. Now no idea how to replace belt! Any ideas please?

Slipping treadmill: Proform 745CS?

Okay, my problem is a slipping tread belt. I think that's what it's called; the mat that you run on. Anyway, i... [Read more]

Treadmill Noise?

I just assembled my Proform 580. It went together easily and runs well. The belt is centered and does not appe... [Read more]

bosch wff 2000 washer - the main drive motor never starts up in the cycle?

fills, pumps out, belt etc in place. main drive motor has a 6 pin mutiplug input, all the leads brown. wit... [Read more]

creda simplicity tvr2 belt changed drum not turning ?

Fitted a new drive belt to this machine started the machine again the drum isn't turning and there was a smell... [Read more]

Bremshey pacer HRC S running machine?

I have a bremshey pacer HRC S running machine and I have an E1 error on the display. If I power off then on th... [Read more]

HOTPOINT 9934 MOTOR NOT RUNNING?

PROGRAMS RUN FINE BUT MOTOR IS NOT ENGAGING ON WASH OR SPIN CYCLES. BELT + PUMP ARE OK - COULD IT BE BRUSHES? ... [Read more]

Hoover SIX 1200 drum won't turn - NOT belt?

Just removed top and rear covers and watched what happened on a spin cycle. Control box makes a lot of clickin... [Read more]