How to mend ... Bearing Motor Replaced

I have a performance power 9" angle grinder,I have replaced the bearing in ?

I have replaced the bearing in the gearbox that supports the motor.Now it is running backwards on blade rotati... [Read more]

how do i fix triton T90xr?

Hi, there is a burning smell from my shower.I opened it up an think it was coming from the bushes as they were... [Read more]

sounds like aircraft engine when spinning?

Washing machine (GE top load) sounds like an aircraft engine when spinning. Replaced tub bearing and seal and... [Read more]

AEG Lavatherm 57700 Condenser Dryer?

I have replaced the motor, pulley, belt and the front tube felt bearing. I have put it all together and star... [Read more]

How can I get a bearing for the motor in my Dyson DC01 vacuum cleaner?

Where can I get a bearing (commutator end) replaced in the YV-540 electric motor out of my Dyson DC01 vaccuum ... [Read more]

Tvm560p dryer will not kick in?

New shaft bearing fitted.Now motor will not kick in.Replaced condenser.Power to motor but it will not turn.

Fisher & Paykel GW601 spin problem?

Would greatly appreciate help with this washing machine. I replaced the rotor position sensor after machine s... [Read more]

How are the bearings removed and replaced Fisher Paykel GW703?

Fisher Paykel GW703-U. The wash bowl and plastic outer tub have been removed, the motor and the spindle have ... [Read more]

Maytag washer won't spin, LAT8426AAE?

maytag washer "Dependable Care" 14 yrs old. will not spin. I have read many, many articles on the net, "troubl... [Read more]

what is wrong with my F&P smart drive 601?

I have recently replaced the bearings and seal on my 601. I have reassembled the machine correctly (I think).... [Read more]

hotpoint reversomatic 9320?

I suspect the bearings have failed, as when switched on, the drum rotates about half an inch then stops, and i... [Read more]

Riello Burner Motor Sound?

Getting an wineing sound when the motor comes on after the normal programed delay. Almost sounds like the pump... [Read more]

How do I replace the heater motor bearing/bush on my 2007 XTrail?

My XTrail heater fan makes a loud humming sound which usually starts on a RH corner or roundabout. I used to ... [Read more]

Bosch Tumble Dryer WTA4108GB/01 tripping electric?

As above, I have a 4 year old tumble WTA4108GB/01 which has worked fine up until recently. About a month ago,... [Read more]

Fan oven motor for Bosch HBN9150?

Just over a year ago I replaced the fan motor on our Bosch oven which was only about 5 years old. Now the new ... [Read more]

replaceing part?

i have a qualcast turbo trak 35 rotary mower i have taken it apart and got out the motor at the end of the ... [Read more]

Hotpoint WD71 - has the bearing gone?

On Christmas Eve (typical!) I went to get my washing out and was faced with a room full of stinking smoke. ... [Read more]

Washing machine noise?

My L.G. WD-1021W washing machine makes a terrible noise on spin. I have replaced both the motor bearings and I... [Read more]

AEG 'O'KO Lavamat 971 Sensotronic - Can I replace the motor bearing?

I suspect the bearing at the output end of the motor is gone, due to the noise coming from it when you turn th... [Read more]

Hotpoint WD61 Stops part way through program?

Getting fed-up; I've tried all my usual standbys, but I cant find the problem. The machine was stopping part w... [Read more]