How to mend Fault

300/500 series alarm?

My alarm system has developed a fault I thought it was the battery (dated 2011)which I have now renewed but th... [Read more]

Scantronic 9827 alarm keypad?

Hi. I have replaced a 9800 keypad (on a 9800 control panel) with a 9827 keypad for someone as some of the old ... [Read more]

9448+ panel problem?

The panel has been powered down, as a continuous tamper fault is occuring. I have linked out the A/T termina... [Read more]

3

How can I reset a 9827 control pad?

Hi how do I reset a 9827 control pad after changing the main Box battery. Control pad is showing a constant re... [Read more]

3

Pyronix Deltabell Plus Backlight fault?

I have installed a Pyronix delta bell plus 2 with backlight on a Texecom Veritas panel. All was ok and now the... [Read more]

tamper fault bently f-130?

fuse blown on main board which caused alarm to go off put new fuse in main board now alarm buzzing in the hous... [Read more]

6

Veritas 8 fault?

I have a fault with my alarm that even if its off sometimes it starts beeping as if thew keypad is being press... [Read more]

odyssey 3 alarm fault relay output?

hi there, i am in the process of connecting a second bellbox (texecom odyssey 3) to my alarm system. on the s... [Read more]

texecom oddysey 3, fault relay output?

i have wired 2 texecom odysseys 3's back and front with using sab and scb combo. i have wired them with 8 core... [Read more]

Does my veritas r8 have a fault?

Recently moved in to a house with a veritas r8 fitted approx 2 years ago. Has always set/unset without issue. ... [Read more]

1

Zone emits beep when walking past even when in day mode?

how do I stop key pad from beeping when in zone of room strobe. Only one strobe is causing the fault. System i... [Read more]

2

Low battery fault?

I have fitted a new eurosec cpl 8l panel LCD and I can't get rid of the Low battery fault, there are no visibl... [Read more]

2

Fault on scantronic 4600 panel?

I keep getting a fault on my scantronic 4600 intruder alarm, for zone 5 (Conservatory). Changed the batteries ... [Read more]

1

Scantronic 9454 - tamp/fault/service?

Hi Just moved into a new house and when electrician was installing a new consumer panel, he removed the fuse ... [Read more]

alarm fault on sl8 panel with keypad?

replaced remote keypad. can access the engineers mode but cannot test passives or outside bell. when the panel... [Read more]

Ko1 tamper fault reset required. How do I reset the alarm ?

I'm in a new shop. I knocked my alarm with step ladders and all he'll broke loose. It's showing a ko1 tamper f... [Read more]

1

Scantronic 9600 Exit doors ?

Hi We bought a house with a Scantronic 9600 alarm already fitted and we had the instructions to change the co... [Read more]

3

Scantronic 9752 com fault how do I fix this?

How can I cancel the yellow light which is permanently showing as alert fault, says Comm Fault.

3

Scantronic 9827 resetting problem?

I have a Scantronic 9800+ house alarm with 9827 keypad. Although the alarm was not set, at 0400 today the ala... [Read more]

scantronic 9200 fault?

My old scantronc has taken to sounding the internal sounder immediately after the exit period has elapsed - an... [Read more]