Mend > Vacuum Cleaners

How do I get the powerhead of my Kenmore 116 23107800C apart to replace the?

Kenmore 116 23107800C Powerhead belt replacement.

How do you fit a belt on to a Dyson DC07 vacuum cleaner?

I have tried to follow the maker`s instructions to fit a belt on to my Dyson DC07 vacuum but find it impossibl... [Read more]

changing the filter?

How do I change the filter (not the bag) on this kenmore vacuum model 3451290

G6 Kirby vac, self-propelled. How to re-install the neutral/drive lever?

The neutral/driver lever has fallen off. I can hear a loose "nut" inside the vac. How can it be repaired?

No solution comming out?

When I use the machine the solution doesn't come out to wash the carpet.

REmoving the lower casing onmy Hoover Hurricane Vacum cleaner?

I was using the vacum when it made a bang & smoke came from it I have tried to remove the lower casing but ca... [Read more]

REmoving the lower casing onmy Hoover Hurricane Vacum cleaner?

I was using the vacum when it made a bang & smoke came from it I have tried to remove the lower casing but ca... [Read more]

Electrolux 5000 electrical?

What is the component between the the hot side of 120v source & the power nozzel connector on the vacuum. Thi... [Read more]

how to put a belt on vacuum cleaner morphy richards 73335?

please tell me how to put a belt on my morphy richards vacuum model no 73335 serialno 90009294 thankyou.

repair anasonic cleaner?

I need to know how to take apart my panasonc MC-G885 vacuum cleaner. Tiny gritty bits of something got inside ... [Read more]

problem with karcher window vac wv50?

I went to charge the window vac yeaterday the red light started to flash rapidly left to charge for couple of ... [Read more]

How can I fix my Dyson C32 when it was burned due to high volt source?

I have accidentally plugged in my Dyson C32 in a stepped up transformer that was plugged into a 220V outlet in... [Read more]

my bissell pro heat 2x wont spray out water ?

my bissell pro heat 2x wont spray solution and water properly help

I have a Dyson dc 33, and when I go to vacuum it is so hard to push forward?

Need some help on fixing this problem.

my dyson roller wont work belt ok no blockage or fibre around it its the c?

is the clutch in my dyson broke belt ok no blockage

how can i repair my bosch vac cleaner 1700w?

brush rollers is not working properly. it switchs off and on when hoovering. is there a sensor somewhere to te... [Read more]

Require switch type number ?

Kenmore central vacuum 34226 stay on when plugged in the wall. Resistance across the two contacts of the hose ... [Read more]

trying to fix Hoover mach3.3 vacuum cleaner?

The vac does not suck dirt in to the bag. I found an obstruction in the hose and cleaned it out. Cleaned out t... [Read more]

how can i fix my dyson dc14?

something arcing inside the motor housing, how do i remove motor from its housing to check there is no foreign... [Read more]

Brush roller settring?

What is the optimum brush roller settin for my g6d Kirby vacuum?