Recent: How to Reset Westwood T50 Service Light | 2018 Model

Mend > Home Alarm Systems

Mend Veritas Alarm Power Lights

How do i reset my alarm(Veritas ins036) after a power cut?

I have a Veritas ins036 alarm. We've just had a power cut and the power has been restored. However, the alarm is showing all the lights at red and when i press the buttons nothing happens(no tone or anything). Does anyone know if you have to do something specific after a power cut as this is not mentioned in the manual?

Richard
October 2007
Not sure about "036" as a model ???
Try powering down mains and battery
Leave dowpowered for 1 minute
Power up

Alarm Engineer Bristol
November 2007

Automatic Answer

We may have found other answers which could help you.

Click here for Alarm Power Lights

Related Questions ...

Mend security system battery
1

Cooper Scantronic 9448 alarm?

Have a Cooper Scantronic alarm system . Instruction book say 9448+ but front of small control box by entry is ... [Read more]
Mend How to mend it?
3

Yale IA-320 alarm Smart Hub keeps disconnecting/no internet?

The Smart Hub for my Yale IA-320 alarm seems to loose internet connection about once a week. When I look at t... [Read more]
Mend scantronic keypad battery
2

Scantronic 9800 problem?

Hi, this morning I unset my alarm (28 years old) and as I am doing some electrical work in the kitchen, I need... [Read more]
Mend security alarm power
3

alarm beeping unset and power button flashing?

just after bit of advice please got up this morning and alarm was making a beep noise around every 30 seconds ... [Read more]
Mend light accenta 6
1

Blue light flashing on my accenta 6?

HI we had a power cut and when the power went back on our Accenta 6 alarm went off.....we have the code so use... [Read more]
Mend alarm remote disconnected
2

remote Led keypad power and all indicator lights dont light up?

I recently disconnected the remote led keypad from my 8SP401 Accentra alarm to relocate it and when reconnecte... [Read more]
Mend security system control panel reset code
1

veritas alarm cannot be reset or accepts code?

I had to disconnect power on house electrical board in order to fit new sockets switches and dimmer switches f... [Read more]
Mend battery house installed
1

Vertitas 8C alarm - internal battery keeps dying?

Hi I have a Veritas 8C alarm in my house which was installed prior to moving into the property 4 years ago. ... [Read more]
Mend alarm security system battery
3

Scantronic 9200 front panel - lights on, keypad not working?

Hi, I have a Scantronic 9200 alarm which was installed in 1986!! I had to switch the mains power off for a whi... [Read more]
Mend accenta work alarm
7

Accenta 8 outside siren not working?

We recently had some painting work done to the outside of the house and the contractor (bless him) silenced th... [Read more]
Mend security system honeywell
1

cannot reset Accenta 8ep471a keypad?

I live in a first-floor flat and in the early hours today my alarm went off 3 times, even though the system wa... [Read more]
Mend reset lights pressing
1

How can I reset my optima compact alarm?

Due to a power cut my optima compact alarm was triggered and now won't reset .All the lights are on but am get... [Read more]
Mend reset veritas alarm after tamper
2

How do you reset a veritas alarm after a tamper?

My dog chewed through the cable to the break glass detector on our alarm system. I reconnected the detector a... [Read more]
Mend security system detectors
1

panel mains light not lighting up, C&K SECURITECH?

Alarm system appears fully powered,panel lights up when buttons pushed and led's on all detectors light up whe... [Read more]
Mend keypad system disarm
7

Key Pad Sounder Alarm?

The READY, POWER and ALARM lights all remained on except the ALARM light went off when I disarmed the system. ... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Home Alarm Systems ...

Related Categories

Mend Car Alarm Systems
Car Alarm Systems