Recent: LG FC930W Safe Mode: Unlock Front Buttons Without Remote

Mend > Lawn Mowers

Mend Briggs & Stratton 3HP Engine Lawnmower

Gap size between flywheel and coil Briggs and Stratton 3HP?

Does anyone know the size of the gap between the flywheel and coil thingy? It's the sort with "electronic ignition" (no points)The engine is a 3HP Briggs and Stratton.
Ness

Ness
October 2007
You can just gap it with a piece of letter paper folded in half once. Basicly, put the coil as close to the flywheel as possible without it rubbing on the flywheel. I do this all the time on my 3hp briggs engines. (I have 4 of them on various equipment.)

SD redneck :)
October 2012
.010 - .014

bgentle
July 2010
0.010" to 0.015"

John K
January 2008
Use a piece of microfilm doubled up to set gap

Ben Hill
January 2008
I`m not sure of the gap size but you can use a business card to gap it

bg
October 2007

Related Questions ...

Mend How to mend it?
2

How can I fix Mountfield Laser Omega 46 Lawnmower?

How do I remove a damaged Blade Boss from a mountfield laser Omega 46 cm push mower. Do I need a special tool,... [Read more]
Mend lawnmower mower briggs
1

litres of oil needed in a countax c600h ride on lawnmower?

My Countax lawn mower has a Briggs And Stratton 16 HP engine. How many litres of engine oil is need to change ... [Read more]
Mend size bolts holding
1

McCulloch lawnmower parts removal ?

Does anyone know the size and type of screwdriver you need to remove to two bolts holding the Carburetor in pl... [Read more]
Mend lawnmower throttle engine
2

Run away engine?

Have B&S riding lawnmower motor Model: 28S777. Once started, it runs wide open. It will not slow down. Have ... [Read more]
Mend start starter briggs
1

lawnmower backfires wont start ?

i have mcculloch m56 875 dwa self starter briggs and stratton engine i have just changed the blade which invol... [Read more]
Mend lawnmower engine replacement
1

how do I replace the pull chord on my Harry lawnmower?

how do I replace the pull chord on my Harry lawnmower with a briggs and stratton 3.5hp engine. Model & type nu... [Read more]
Mend carburetor briggs & stratton engine
2

engine loping( chugging)?

I have a lawnmower( craftsman) with a briggs & stratton 3.75 sprint engine. It starts good, but lopes (chuggs... [Read more]
Mend lawnmower briggs stratton
1

drive cable?

Where do i find a drive cable for a florabest lawnmower , ( bought in Liddle ) the mower has a briggs and stra... [Read more]
Mend lawnmower replacement engine
1

how to replace clutch cable on Flymo Quicksilver 46SD?

2 year old lawnmower with Briggs and Stratton engine,what is the procedure to get access to the transmission ... [Read more]
Mend briggs stratton lawnmower
1

timeing seems to be out?

the timeing seems to be out on my briggs and stratton lawnmower engine how do you re time them thanks.
Mend engine briggs straton
1

Engine ?

I have a 16.5 hp briggs and straton on my MTD riding lawnmower. It often smokes when started and now has a sta... [Read more]
Mend lawnmower engine repair
3

work shop manual for qualcast lawnmower?

need a work shop manual for a qualcast lawnmower this is fitted with a briggs&stratton engine r l 400
Mend lawnmower engine briggs stratton
1

Lawnmower not starting?

My mower just quit in the middle of running, and it will not start. It's about 5 or 6 years old, never had an... [Read more]
Mend lawnmower engine repair
1

how can I fix my lawnmower?

I have a 16 hp briggs and stratton engine on a murray mower.. sometimes it will mow my whole yard but, but if ... [Read more]
Mend lawnmower petrol engine engine problem
1

Hayter lawnmower problem?

I have a hayter mower fitted with a briggs and stratton quantum xm 35 petrol engine. model 121882 type 0419-0... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Lawn Mowers ...