My Novagard 2 SAB keeps activating (panel Veritas 8Compact)?
Hi, I hope some one can help. I Have replaced an existing alarm with a Veritas8 Compact. The SAB is the Gardtech Novagard 2. As an existing system I connected the Veritas 8 to the 6 zoned PIR's and the SAB. I wired exactly as per the Installation Manual. When I connect the internal SAB battery the bell produces an alarm signal, the alarm does not activate untill I connect this battery. Also I can create a tamper on the Panel which causes an alarm activation without the battery connected. Any advice would be much apprecaiated,
I did a complete check in engineer mode, walk test 06 with bell box connected and cover fitted, 9 beeps with tamper error shown. On pressing omit(extended display)zone 1 lit meaning bell tamper error. I tried same test with bell box disconnected and no error shown.I think that I need a new bell box unless anyone knows different.
marko
September 2007
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix home alarm systems.