Mend Indesit Washing Machines

Mend Household Appliances, Washing Machines

Find out how to mend it for free.

Ask Question

Find out how to mend Indesit washing machines

Mend washing machines ...

Mend Washing Machines

Mend > Washing Machines

Need reset code for indesit WiL143S?

Hi, having problems with my machine only had it 2 and a half years lights flash seems to be stuck on prewash, i think the problem is my 3 year old twins messing about with the settings when the machine has been switched on, tried resetting it with the code that someone sent in but they said the machine had to be switched off and the programmer had to be turned to the end position[ denoted by a dot], which i couldn't find would be great if someone could tell me how to do it as i can't afford a new washing machine and it is really peeing me off the model is indesit WiL143S.

Debra walker
August 2007

Indesit Household Appliances, Washing Machines Machine Years Flash

Same problem - all lights flashing + not working. Switching the machine off for 40secobds as recommended by the manual troubleshooting instructions. Managed to get just two of the green (of the five green) plus one red, but can't get it to do this again. All 5 green and one red are flashing.

Alun
December 2015

hya

i just have full flashing light green and red light flashing as well....what wrong with it?

anyone know how to reset it or loose wire or etc???

help will be great?

tracye
March 2011

fabric compartment clogged up

maggie
July 2010

Hi, no flashing at the moment, but water keeps going in the prewash section for every cycle i put on, end up manually stopping it and setting it to spin. Really all i want to know is the reset code.If i Can't sort it out myself, i will just have to buy a new washing machine and i'll never buy indesit again,i'll get a bosch one.

debra walker
August 2007

widl codes - light flashing from left to right are numbers 1-4

f01 light 4, motor triac
f02 light 3 motor, jammed/ tacho
f03 lights 3&4 Ntc fault
f04 light 2. pressure sw stuck on empty
f05 lights 2&4, pressure sw stuck on full
f06 lights 2&3, N/A?
f07 lights 2&3&4 heater relay
f08 light 1. heater relay
f09 lights 1&4 eprom/setup error
f10 lights 1&3, pressure switch not sensing
f11 lights 1&3&4, pump/draining error
f12 lights 1&2, communication error
f13 lights 1&2&4, dryer ntc/ fan motor
f14 lights 1&2&3, dryer heater
f15 lights 1&2&3&4, dryer heater relay
f16 N/A
f17 light 4, door lock
f18 light 3 comms error (3 phase motor) power board

hi check the lights against yours and come back to me

msdapudsey1@msn.com

phil grimshaw
August 2007