Naiko DW120 dishwasher programmer stuck?

we had the same problem - when it first happened the thing was running all night. have sent for a few spares but when we removed the element it actually had a hole in it. we replaced that and it has been fine but it was strange that none of the fuses had blown so you could also check the electrics first.

sue and paul
July 2009

I am afraid I do not have an answer but have been given a tabletop Naiko dishwasher DW040 for which I have no instructions. I am desperate to discover where the salt and rinse aid go because I do not want to use the incorrect slot.

With thanks.

Janet
October 2008

Thanks for the reply. Interesting that having changed the programmer, your machine still stops at the same place. I was going to change the programmer on mine but after stripping the front door down to still find the timer sealed, I just resorted to 'manually persuade it'. Its been ok for about 5 weeks now, just waiting for the next episode!

Paul
October 2007

I have a Naiko DW080 that is doing the same thing. I just tried replacing the rotary timer (after waiting months for the part to arrive) and it still stops in exactly the same points on both the dishes and glasses cycle.

I suspect it is waiting for a signal from something.

Symptoms: water is heating and when I open the door (where it gets stuck) the dishwasher has hot foam on the floor and walls of dishwasher.

If I work out what is wrong before I boot the whole thing out the door I will post again.

J Pearce
September 2007