How do I reset the code on my Concept 6 Burglar alarm panel?
I have a Concept 6 Advanced Microprocessor control for my burglar alarm in my house, which has been there since it was built. Unfortunately the people who lived here before me don't seem to have left me the instruction manual. I would like to change the code from the one they used to one of my own but haven't a clue where to start. If anyone has any clue then please could you let me know....I don't want to upset the neighbours by setting the alarm off!!!!
If for any reason it has lost the code you programmed, try 0123 as this should be the default.
dpf
November 2021
Hiya I have a concept advanced microprocessor power control and it does not work.only 2 lights show and that is day and power i tryed to do what pete said but it still doent work.Please can you help me.I am desprate to make it work.
Amelia
March 2012
It doesnt work for me so how do i do it ?? thanks tamper doesnt come on at all and 4 indicator buttons dont come on so can you please tell me
Babes
March 2012
Hey pete the exact same thin happened to me, can you send me a copy of this manual please
Craig Evans
March 2010
Hey pete the exact same thin happened to me, can you send me a copy of this manual please
Craig Evans
February 2010
Hey pete the exact same thin happened to me, can you send me a copy of this manual please
Craig Evans
February 2010
If you need a copy of the user manual I can supply.... leave your email here. in the meantime, here is how to change your code.
Pete
July 2007
Press Prog button.... all lights show
Enter your current code ..... day and tamper lights show
Press no.8 ........ 4 zone indicators show.
now enter your NEW code ( 4 digits)... bleeps twice and day & tamper lights show.
Press Reset ... returns to Day. and your new code is active.
Good luck.
Pete
July 2007
I can answer this question...
How do I reset the code on my Concept 6 Burglar alarm panel?
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix home alarm systems.