Simpson Aquarius 706 Overflow problem - Pressure Switch?

Hi Lindsay,

Thanks for your advice. I had a look at the hose going from the water level switch into some kind of connector (the diaphragm isn't accessible from the top); it was on but not very tight, so I replaced it with a vacuum hose I had left over from my car. It's the same internal diameter (almost) but the outer thickness is different; will this matter? Do you know what this hose actually carries?

Thanks again for your help.

Daniel Beattie
February 2005

hi, on the left hand side of the control panel the water level "switch" connects via rubber hose to a diaphram. i would take the top panel off first and make sure hose is OK and connected OK. I am not sure if the diaphrapm is accessed from the top

lindsay
February 2005