Why does my Accenta alarm go off as soon as we get a power cut?
My Accenta alarm goes off immediately there is a power cut. I know they have a battery inside for this purpose if a burgular cut the electric - but I vaguely remember a 10 hour or so power cut a couple of years ago, where I think I was able to use they keypad to stop it ringing, until the back up battery ran out of power and it went off again. How do I get it to this state (if possible again) as scrabbling around at 5.30 this morning trying to shut it up is something I don't want to have to repeat, thanks
try changing the battery in the bell box its not holding its charge or it could be the one in the control panel i had the same problem i changed both batteries as they had been in a few years this solved the problem good look
blackie 147
April 2007
Sounds like your alarm system needs a new back up battery .
approximately £10 from an electrical wholesalers
john from stoke
March 2007
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix home alarm systems.