get a stanley knife, slice the label along the spine where the two halves meet.
-turn over cassette remove 5 philps screws
-turn back up again, lift off top,
- pull out the clear leader tape from full reel's end
-using a small flat blaDE screwdriver, remove clip on empty reel.
-place clear leader tape over the gap at the centre of reel hub and lay clip back on, press down on it with the screwdriver till it snaps into place . this may need a few attempts!
-rethread tape around guide poles. reassemble.
romko
January 2007
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix cassette recorders.