Mend > Document Laminators

Mend Office Appliances, Document Laminators

How can I mend my Seal RL918 Lamination machine?

I have a seal RL918 laminator. The Lamination sheets got jammed and stalled out the motor, which caused the fuse to blow in the power supply. I replaced the fuse but rollers won't turn. If I remove the drive chain the motor runs fine. The voltages going to the motor are not stable. Jumps up and down.

Rick Sokol
September 2023

Office Appliances, Document Laminators

If the motor is turning freely, so long as it is actually capable of delivering enough torque, that suggests something in the drive train might be seized or otherwise blocked or stiff.

Try working through the mechanical drive path, trying to move things by hand and see if you can isolate what it is that is baulking.

Sthji
September 2023

Find out how to mend document laminators

G5640 Laminator?

the machine shows the red light on, buy that's all. the machine does not ?

How can I repair my GBC Pinnacle 27?

How Can I Fix a GBC 620 0S,2013?

Laminator gbc ultima 65 How to reinstall a power switch?

How can I mend my Seal RL918 Lamination machine?

How do I stop the overheating of our Ultima 65 laminator?

my new blusmart laminator dont work when plugged in?

GBC Ultima 65 laminator?

GBC DocuSeal 95 Roller Won't Turn?

How to Remove an item from a Fellows Mars A4 laminator?

How do I replace a fuse in the 4250?

Mend Document Laminators

Related Categories

Mend > Document Laminators

How can I mend my Seal RL918 Lamination machine?

How can I mend my Seal RL918 Lamination machine?

I can answer this question ...

How can I mend my Seal RL918 Lamination machine?

How to mend ...

Mend document laminators ...

GBC Ultima 65 laminator?

How can I mend my Seal RL918 Lamination machine?

GBC Ultima 65 not sealing edges?

Call engineer icons?

G5640 Laminator?