Recent: Will I need to replace my garden tap?

Mend > Cash Registers

Mend TEC MA1350 Light Works Set

i got a used tec ma 1350 when i plug all light are on can't do anything ?

i got a used tec ma 1350 when i plug it up all the lights light up and nothing works no matter where the key is set some times a error will come across the screen

Bill
December 2018
All lights on a TEC indicates loss of program. Battery is either flat or stuffed (best to have it replaced). Then it will need programming.
The programming manual is a rare beast. Only one I know of is here ...

https://the-checkout-tech.com/manuals/cashregisters/TEC_MA-1350-2_series_programming_manual.html

Registerman
December 2018

Automatic Answer

We may have found other answers which could help you.

Click here for Light Works Set

Related Questions ...

Mend oven electric neff
2

Neff B1442NOGB/01 Elements not heating?

Turned the oven on today, started heating up (I know that because I turned the thermostat down to see what tem... [Read more]
Mend oven not heat up
1

why does my oven not heat up?

My diplomat adp3300 oven will not heat up the clock is set and the light comes on above the temperature switch... [Read more]
Mend problem works fine
4

Fisher & Paykel Smart Drive 508 - problem with warm/hot washes?

My Smart Drive 508 works fine on a cold wash but when I want to do warm it goes to hot and then light starts f... [Read more]
Mend fault solid light
2

intermittant Siemens RDJ10RF/SET fault?

RDJ10RF - tried the reset procedure. Have a solid green light. Works in a morning to turn heating on 'preset 1... [Read more]
Mend security system error
1

veritas r8 rkp's error?

Last night I set my garage alarm was all fine went in the garage this morning alarm was bleeping as usual trie... [Read more]
Mend c k alarm fault
1

C & K Securitech Alarm fault?

After switching off the electric to repair a plug socket the alarm won't work. It is making a buzzing sound on... [Read more]
Mend set walk test
3

alarm will not set - veritas 8c?

Have tried everything in manual under trouble shooting. Alarm will not set have done all e.g the walk test, st... [Read more]
Mend oven temperature smeg
1

electric oven has stopped working?

i have a smeg range gas top electric oven, the clock is on and the ignition for the gas works but the oven wo... [Read more]
Mend red light wont
2

Pir red light always on and zone won't set?

Hi I have a pir on the landing with a permanent red light. If I set the alarm it fails on that zone but if ... [Read more]
Mend alarm security system control panel
8

Control Panel flashing Rf problem?

My eight year old Scantronic 500r+ free wire alarm with four 515r PIRs have never given any problems until rec... [Read more]
Mend electrical wiring fault
4

2way switch problem?

hi, have replaced light fittings up and downstairs in 2 way switch set up. Downstairs works fine but upstairs ... [Read more]
Mend working help 02
1

Only some rear lights working, Peugeot 206?

Hi hopefully someone can help... The rear lights on my 02 206 are playing up. On the left light set only th... [Read more]
Mend alarm zones sounder
5

Home Alarm Systems?

I have recently added a Remote Keypad to my Veritas 8 Alarm, and although it seems to be functioning fine, the... [Read more]
Mend freeview off tv
1

Techwood freeview STB dv925b switches off TV. Why?

Had my set top box for about 18 months now. It started out brilliantly but now seems to suddenly switch off th... [Read more]
Mend boiler hot water central heating
1

how do i replace a DHW Diaphragm on a baxi 105e?

When the boiler is set to either central heating or hot water the boiler does not fire up when turning taps on... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Cash Registers ...