i have a creda automatic and when I lifted off the cover the solder melted off between the two posts so I took another piece of solder relatively the same size turned the breaker back on the turned on for about thirty seconds and saw a spark and it burnt that piece of solder also to break the contact any ideas?
you can buy the correct thermal fuse from Maplin it needs to be 165 degrees and looks a bit like a resistor.you should also test the elements to make sure there isn't a short
toptrish
November 2016
Get someone COMPETENT to look at it. You may find it is more cost-effective simply to get a new one.
belp
November 2016
Its knackered and you have made it worse by your ignorance.
howtomendit.com for free repair help, information and advice.
