Recent: Safely remove screen protector from a Macbook Air?

Mend > Washing Machines

Mend Defy 600 Machine Good Pressure

my Defy Automaid does not allow water into the machine?

Defy Automaid 600. Machine wont start because no water is allowed into the machine although there is good pressure at the tap!
The machine is not draining during and after the spin cycle.
Are these two issues linked and how do I fix it?

Linden Kerwin
August 2015

Automatic Answer

While you wait for answers, we may have found some information which could help you.

Click here for Machine Good Pressure

Related Questions ...

Mend washing machine drainage hotpoint
2

Hotpoint Washing Machine WF340: flashing red lights?

Hotpoint Washing Machine WF340: on/off red light flashing rapidly and 'rinse hold'/'mini load' red lights flas... [Read more]
Mend washing machine powder
1

how can i fix Bendix BIW 103W ?

I have a Bendix BIW 103W washing machine trickle fills, wont clear powder or fab softner from dispencer, water... [Read more]
Mend washing machine fills powder
2

how can i fix Bendix BIW 103W ?

I have a Bendix BIW 103W washing machine trickle fills, wont clear powder or fab softner from dispencer, water... [Read more]
Mend hotpoint time water
1

Hotpoint WF321P W/Machine?

indicator lights and option button lights all flashing at the same time , water pressure good , door firmly c... [Read more]
Mend machine wash cycle timer
1

how can i fix my Ariston A1636 washing machine?

When i try to run any wash cycle the delay timer and Easy iron lights flash at the same interval rate .Also do... [Read more]
Mend water pressure good
2

Miele W916 water inflow is too low, but pressure is good and inlet clean?

My Miele W916 grumbles of "check water inlet" for most wash cycles having stopped before really getting going.... [Read more]
Mend washing machine Zanussi repair
1

how can i fix washing machine?

zanussi jetstream 1200.water hoses conected but no water goes into machine water pressure very good any one he... [Read more]
Mend zanussi washing machine
1

Zanussi Aquacycle 1050 in standby!?

My washing machine has been stood in a garage for 12 months and worked fine prior to this. Now it just sits wi... [Read more]
Mend How to mend it?
1

SOLUTION wt960 f10 problem?

I had this problem with my wt960 it also showed up other fault codes.so after a bit of messing on I managed to... [Read more]
Mend cold washing machine hot
2

My Whirlpool 8280869 Fills very slowly on a cold cycle?

My washing machine fills very slowly on a cold cycle. It fills fine on hot cycle and somewhere in between on ... [Read more]
Mend washing machine fault reset
3

Indesit washing machine dial keeps turning?

Hi - my 1 year old Indesit WD101 has developed a fault, which appears to be a quite common one. When washing s... [Read more]
Mend hotpoint dryer working fine
1

Hotpoint WD72S Washer Dryer, E11 ERROR?

Machine has been working fine for approx 2.5 yrs, It now stops due to an E11 error 10 minutes into a hot wa... [Read more]
Mend washing machine whirlpool cycle
1

How can I fix my Whirlpool Superclean 2 speed 7 cycle washing machine?

I have good water pressure going into the machine, but hardly any water coming out of the spout into the washi... [Read more]
Mend whirlpool washer water
1

my whirlpool inspirations washer does not fill with cold water?

My whirlpool inspirations washing machine does not fill with cold water and stops at the rinse cycle. I have c... [Read more]
Mend washing machine water level drum
3

Hotpoint Aquarius WMA56 part-fill problem?

My WMA 56 only partly fills. Spin is OK. The engineer (who is experienced and excellent) is totally baffled - ... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Washing Machines ...