had c9 fault on aeg 86741 update washer,had new motor fitted but still every month or so shows c9,anyone know correct procedure for a reset on programmer please,jake
Press and hold PRE-WASH and SOAKING buttons in at the same time, then turn the control knob to Short Spin. Wait one or two seconds and all the indicators should illuminate. Then turn the control knob to OFF. All the indicators should go out. Then try to use your machine as normal. This should clear the C9 error code. If it does NOT – there may be another fault present.
blindmelon
July 2009
Automatic Answer
We may have found other answers which could help you.