have a 20 horse 50 inch cut tractor by sears craftsmen that when you turn key on you have to wiggle clutch pedal and finally turns over, now it sounds like a real slow starter, is this a bad starter or solenoid or?
sorry but I didn`t mention it could be a faulty cluch safety devide too.
bg
October 2005
Could just be a bad connection if you had to wriggle clutch pedal but if you take a test light to solenoid when your tryin to start it you`ll be able to check it from there .....if voltage is at solenoid the go to the starter and check voltage there .......
Might want to use a volt meter to see if ya got a voltage drop going to the starter ...
bg
October 2005
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
