Recent: Will I need to replace my garden tap?

Mend > Home Alarm Systems

Mend Take Out Battery

how do take out battery?

My alarm system has been buggered by constant power cuts in my area as a result I can't afford to keep replacing the battery so its not actually working.....but the box outside keeps going off every time the power goes off.I need to turn the box off outside I've been told to cut the wire which runs from the battery......please help.

sue
January 2014
Most panels will take a bigger battery.

You give no make of panel or battery Ah rating fitted at present,so can't really advise other than agree with all gts has said.

I'm thinking bigger battery if your panel will accept one.

e manno
January 2014
do not cut any wires,the sab in bell box will sound for about 2 or 3 hours at a reduced level then it will die,when power restored it will charge up bell box battery and panel battery you have nothing to worry about,if your neibours alarm system are up to standard then they be going off too ,happy new year to you and your family

gts
January 2014
you don't need to replace the battery

gts
January 2014
listen sue,if I may be so forward to address you by your first name,your alarm is mains powered if power fails the battery takes over,by law it must power your system for 8 hours,after that the bell box will power up and sound,till the sab module runs out,when the power comes back on ,the battery will recharge

gts
January 2014
It was the man who replaced the battery for me believe it or not.
Thank you but I'm still stuck in what to do.

sue
January 2014
you don't keep replacing the battery,as long as you fit new one it will recharge when the power comes back on they last between 3 and 5 years do not heed what ever idiot told you to cut any wires

gts
January 2014

Related Questions ...

Mend accenta power lit alarm
1

Accenta 6 RKP no power, but numbers lit after powercut?

I have an accenta 6 alarm system, after a power cut the RKP is not working - the numbers are lit but the red p... [Read more]
Mend security system home alarm battery
1

How can I change battery on my veritas alarm ?

I have a flashing green light which I found out means battery needs changing But I have tried & failed cos ... [Read more]
Mend alarm mini box
1

can not reset alarm system / accenta 8 mini optima?

Hi, can not reset the above alarm due to a tamper i have opened the control box and found that the battery ... [Read more]
Mend alarm bell set
2

Why alarm keeps saying bell tamper ?

Eurosec cp8l lcd alarm set off without warning when kitchen being fitted, now unable to re-set, reading bell t... [Read more]
Mend tamper pir keypad
15

Accenta G4 mini and remote keypad only illuminating?

I recently had an issue with my Accenta G4 alarm and remote keypad. For some unknown reason the tampers were a... [Read more]
Mend alarm battery control
4

how can i power down my 9448 alarm?

i need to have the power off my 9448 alarm for a few days,how can i stop the bells ringing?.if i take the batt... [Read more]
Mend alarm system keypad tamper
5

Scantronic 9651 won't reset?

I'm having a problem with my Scantronic 9651. The keypad is showing Ver 4.00 Feb 15 2007 but won't accept entr... [Read more]
Mend advise battery thinking
6

scantronic 9800?

Hello Can someone please advise what battery I can use in my scantronic 9800 I am thinking about the screwfix... [Read more]
Mend burglar alarm box
1

burglar alarm box is hot *& smells?

Should I take out the battery of my burglar alarm as it is hot & smells
Mend security system battery
5

Veritas Alarm Problem?

my veritas alarm went off when had short power cut. couldnt turn it off!! took panel off and had to take fuses... [Read more]
Mend scantronic battery reset
2

Scantronic 9800: Changed battery. Now wants remote reset?

Had a bF code on our alarm this morning - usually inputting our customer code clears this and the internal sir... [Read more]
Mend veritas 8 alarm
1

Veritas 8 alarm?

I have a veritas 8 alarm and the control box has started to buzz , can be quite annoying as its quite load , i... [Read more]
Mend alarm control panel fault
3

How to reset Scantronic 9454 after control panel battery change ?

A friends Scantronic 9454 alarm has had it's control panel battery replaced but now 3 LEDs are flashing (fault... [Read more]
Mend alarm tamper battery
1

help fix my melcom st6000?

can anyone help me please .. its in tamper mode and i can not get back into day mode .. if i take battery out ... [Read more]
Mend fuse alarm box
1

melcomst6000?

put new battery in control panel put fuse in fuseswitch alarm sounds put in code in control box alarm switches... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Home Alarm Systems ...

Related Categories

Mend Car Alarm Systems
Car Alarm Systems