Hi I'm trying to fix my alarm after taking lid of control panel off (stupid mistake to make) and after goggling I have entered my user code twice but is saying OMIT ZONE? So don't know what to press next......anyone be able to help me?
GTS & Acorn... You chaps are geniuses. Thank you. I've been punting around the web, subscribing and posting on forums, and generally getting nowhere. A thoughtful (and voyeuristically amused) read of this thread, and you've solved my problem. Well done Gentlemen (or Ladies), and thank you, thank you, thank you.
Piers
January 2016
The code gts gave you is that panels factory default engineering code,it was worth giving it a try but yours has been changed by the installer or engineer who last had contact with it.
The only option now is to return the panel back to factory settings and reprogram back up,
We don't give out defaulting info on here for obvious reasons,
Let your engineer get the book and he will sort it for you :)
e manno
December 2012
Ive also just had an engineer out who couldnt fix it so is away to get manual and come back. Any other suggestions? when i key in 07890 it just says invalid code
RACHEL
December 2012
Hi I've tried keying in the code like you said but its still saying lip tamper....reset required.....any other suggestions???
Rachel
December 2012
very true mate
gts
December 2012
Lol
Usual scenario gts she's petrified like most folk that the bells will wail and she can't stop it,
We've all had the phone calls matey,
Guys seem to be macho and say " can you hear it it's doing my head in",
The lady's,well that's a different story.... Sheer panic :D
Crazy how Joe public has faith in there equipment but are petrified of it.
e manno
December 2012
thanks e manno,horse and water comes to mind :-)
gts
December 2012
Gts is trying to save you money here Rachel, he wouldn't give you this info if he could foresee any issues with bells etc,
Any keypad
And no bells
Follow his advice chuck he knows what he's talking about.
e manno
December 2012
to let you understand rachel,its prof engineers on this site,not handy men we give our time and advice for free,to save people money,if you do not wish to take the advice offered,call an engineer out,as i said in last post,
gts
December 2012
it seems you have not done what i said,no prob,get an engineer in,what is the point in asking our advice then just ignore it,
gts
December 2012
I alsi have two keypads and which one should I use?
Rachel
December 2012
Hi if I type in 07890 etc will the alarm go off at any stage. I had previously knocked one of sensors in living room when putting in a new curtain pole and someone had said to try disconnecting battery and reconnecting it to reset system.....some stupid advice that was....that's why I had the lid off. So now it just says lid tamper reset required...
Rachel
December 2012
or,who ever fitted it could not be bothered to alter the status quo!or,as you said,he not know about it,it has to be one of the easy panels to prog alarm guy,to us any way :-)
gts
December 2012
LOL at A1
The 9651`s been fitted by either as a DIY or with engineer reset for tampers.
As the command is buried so deep most miss it.
You need an engineer.
Alarm
December 2012
typical acorn,our help is asked for,and we are ignored,
renews your faith in the human race,it does!!!!!!!
gts
December 2012
A1 - Could you please explain how the User Manual is going to help in this situation.
acorn
December 2012
why did u take the end station lid off?am just being nosey
gts
December 2012
try key in 07890,then press enter,(the tick )if it says installer mode,then press 99 enter,it will say leaving engineering,?press enter,it will say checking system,then it should reset back
to customer mode,if it does not,then its engineer reset,you will have to get some one in,hope this helps
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix home alarm systems.