Recent: Home max fs506x?

Mend > Lighting

Mend Lights Replaced Faulty

1 of 2 new spot lights (replacements) keeps blowing?

Hi, i have just replaced 2 spotlights on my landing as one of them kept blowing (and they where old). i replaced the faulty one and it worked ok with the old fitting (both worked fine ) but when i replaced the second fitting, the first fittings light bulb blew straight away. i am at a loss as to what the problem could be.
i would appreciate any help

Andy
May 2012
cheap bulbs,or you are touching them with your fingers ,there is nothing in a light fitting that will cause a bulb to blow

mm
May 2012

Automatic Answer

We may have found other answers which could help you.

Click here for Lights Replaced Faulty

Related Questions ...

Mend faulty lights works
1

Faulty lights on Dimplex mk11?

Everything else works and I have replaced the bulbs but there's still no light.
Mend peugeot engine lights
1

Peugeot 308 2005 moidel?

First problem was engine periodically sluggish on inclines and on take off from lights - not all the time. So... [Read more]
Mend pilot worm fuelsaver mk2
3

Glow-worm MKII 40B Pilot lights off ?

I have a Glow Worm Fuelsaver Mk2 model 40B. The pilot can be ignited and heating will start without difficulty... [Read more]
Mend washing machine door lock fault
2

I have an Indesit WIL133 washing machine and have a problem?

I have an Indesit WIL 133 washing machine which has stopped working. The status of lights is as follows; All ... [Read more]
Mend repair microwave faulty
1

Can my Neff combination microwave be mended?

I have had my Neff Microwave Combination Oven repaired twice now by the same Domestic Appliance Engineer but i... [Read more]
Mend battery citroen electrical
2

citroen picasso battery charge fault?

i found when i was out driving today that the dash would beep and flash up battery charge fault intermittently... [Read more]
Mend alarm sensor control
6

Faulty Scantronic 9800 main control panel?

I have a 1992 (year) Scantronic 9800 main panel & remote. It has been very reliable. Last week it lost mains... [Read more]
Mend boiler pcb thermistor
1

Micron 60FF flashing Green Led Lights?

My Miicron boilers Led lights flash all the time when turned on, the fan starts but the boiler doesn't fire up... [Read more]
Mend heating repair faulty
1

Replaced fan but not firing up?

Hiya all, Our boiler started making a strange noise one morning last week, and eventually stopped working at ... [Read more]
Mend light work turn
1

Light dimmer wont work?

A while back the light dimmer switch (oneway) stopped dimming the lights however it was able to turn the light... [Read more]
Mend message month ago
1

Unblock diesel Filter 307 2.0hdi?

Hi, i got the message unblock dieseal filter on my 307 about a month ago, sent it in for a full service and a ... [Read more]
Mend heat fault find
1

ravenheat rsf100et no hot water or heat?

i came to fault find on this boiler, pump runs, fan runs, pressure switch ok boiler lights on pilot light and ... [Read more]
Mend dishwasher appears water
1

How do I diagnose and fix my new world dishwasher?

My new world dishwasher is coming on and appears to run through the programme, however after the first small w... [Read more]
Mend faulty van repair
1

faulty break lights?

beak lights dont work what are main causes have replaced the bulbs
Mend boiler ignition sensor
2

Potterton Netaheat 10/16 Mk 2 - Erratic ignition, clicking igniter?

My Potterton Netaheat (it's a good age I know) has developed erratic ignition. It does light up, but often aft... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Lighting ...