Recent: Safely remove screen protector from a Macbook Air?

Mend > Washing Machines

Mend Hotpoint Water Level Washer

water level on my hotpoint washer?

water overfills and does not shut off water regardless of water level setting?

jake O
March 2012
their is a solenoid valve where the inlet hose connect to machine with power supplied by 2 wires.if you use some logic you open this valve to check for dirt or a broken shut off pin inside valve.if you only use one inlet hose change the valves around or alternatively the wires on the valve to solve your problem

jj
March 2012

Automatic Answer

We may have found other answers which could help you.

Click here for Water Level Washer

Related Questions ...

Mend machine water level
1

My fisher paykel wash machine won't spin?

I have a fisher paykel ecosmart washer. When we wash a blanket with water level on high it won't spin and make... [Read more]
Mend washer maytag water level
1

jumper wire?

one end of jumper wire is disconnected, should it be that way? My maytag washer will only fill to the correct ... [Read more]
Mend washing machine fisher and paykel error 49
2

how can fix an error 49 on fisher and paykell washer Mw511 pride?

ive accidently pressed the water level up and down buttons at the same time which has now made my machine beep... [Read more]
Mend washing machine drain pump diagnostic
1

My Fisher & Paykel GWL15-96155B won't pump the water out just back into tub?

Follow up to my previous post: I looked into this again today. The machine will fill the tub with water, the t... [Read more]
Mend washing machine water level pressure switch
1

How to open the washer to be able to get at the water level pressure switch?

How to open the washer to be able to get at the water level pressure switch. The model number of the machine i... [Read more]
Mend washing machine repair pressure switch
1

How to open the washer to be able to get at the water level pressure switch?

How to open the washer to be able to get at the water level pressure switch. The model number of the machine i... [Read more]
Mend washing machine water level pressure switch
1

How to get at the pressure switch that controls the water level?

How to open the washer to be able to get at the water level pressure switch.
Mend water level washer
2

what ajust the water level in a hot piont washer?

What a just the water level or controls the water level in a hot point washer. How is the water level controle... [Read more]
Mend washing machine water inlet no spin
2

Bosch WFR2860 Washing Machine?

When selecting any program and pressing "Start", the door locks and the display shows "Detergent being added" ... [Read more]
Mend drain reset power
1

Does my Maytag washer have a reset button or fuse?

My maytag washer was washing and when the lid was opened and the water level reset to a higher level it filled... [Read more]
Mend switch washer filling
1

How Can I Adjust Screws on Water level Switch?

I have an Elba Washer. It does not stop filling. I checked water level switch. Air tube going to tub is ok. I ... [Read more]
Mend washing machine pcb drain
1

Hotpoint WF321 pumping all the time?

HELP!!!! - I have a hotpoint WF321 washer, and it is stuck on the pump cycle all the time - it will do a spin ... [Read more]
Mend machine washer level
1

My Kenmore 80 Series Model 110.2880390 Washer ?

Our wash machine is overflowing. No matter if the water level setting is set to small, medium, or large loads ... [Read more]
Mend indesit draining cycle water
2

indesit 1263 not draining?

this washer completes the cycle but still has an amount of water left in it,should i check the level switches?
Mend washing machine water level drum
2

WD12S Washer - not enough water??

Hi all Someone gave us a washer and I fitted it ONLY to the cold water and not using the hot water. I noti... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Washing Machines ...