I have an Elba Washer. It does not stop filling. I checked water level switch. Air tube going to tub is ok. I want to know if I can adjust air pressure level on the switch. When I blow air in it, I have to blow harder to produce the "click" sound. I want to make sure the switch is really bad before I replace it. There are 3 big screws and 2 small screws on top. Which ones adjust the pressure.
I had a simular problem on my idesit washing machine , not filling enough water in , & found ( as you view- facing the pressure switch ) The lower right ajuster screw, afects the wash water level ..Screwing in, INCREASES , so try screwing OUT ( anticlockwise) should help !? 0774 6347961 if i can help further i will :)
Steve Nicholls
June 2010
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
