Recent: Will I need to replace my garden tap?

Mend > Home Alarm Systems

Mend Pyronix Accenta G4 Alarm System PIR Zone

how do i add an extra sounder/sound bomb + strobe to alarm system?

Hi, just fitted an alarm system to my property. in the future i will be adding a zone to my yet to be build garden shed. i have ran in an 8core cable for this. how would i add an extra sounder and strobe to to the system to be installed in the shed? would this overload the panel? i was planning to fit a pir in shed, so then i would have 2 cores spare for this.
the panel is an accenta G4 and the existing sounder is a pyronix deltabell plus

thanks

jonny
March 2012
PyronixPyronix Accenta G4Security Systems, Home Alarm SystemsAlarm System PIR Zone
As its a diy system (Grade1) you prob wont be bothered by regs etc. If you do put a sensor in a shed fit a passive/microwave sensor as you'll less likely get false alarms from spiders. As for a sound bomb use the 2 spare cores to power it from the +12 and bell trigger connections. I wouldnt bother with a strobe in my opinion. Easy enough if you have already fitted the rest of the system yourself.

Mike
March 2012
Look at the panel specifications.
Look at what is needed for what you requirements.
See the errors?

I cannot assist as your not going to do anything that slightly meets standards I work to and I would never recommend short cuts if you`re depending on the system.

Alarm
March 2012

Automatic Answer

We may have found other answers which could help you.

Click here for Alarm System PIR Zone

Related Questions ...

Mend red system help moved
2

Red light stays on 1 of the PIR's (Veritas 8 system)?

Hello Hope someone can please help. We have recently moved house and there is a Veritas 8 alarm system fitted... [Read more]
Mend alarm zones sounder
5

Home Alarm Systems?

I have recently added a Remote Keypad to my Veritas 8 Alarm, and although it seems to be functioning fine, the... [Read more]
Mend How to mend it?
6

cannot get radio pir's recognised by the expander?

Installed a Scantronic 9752 panel with a RFX08 8 zone radio expander but I cannot get the system to recognise ... [Read more]
Mend alarm will not set
3

Alarm Will not set?

I have a veritas alarm system at the moment the unset light is constanly flashing on keypad and when code is e... [Read more]
Mend alarm system pir
5

Home Alarm System Optima 2 Plus?

I was stripping wallpaper and managed to pull the front off the Pir. My Optima 2 plus alarm then activated. ... [Read more]
Mend alarm veritas r8
1

zone 2 triggering alarm?

Hi ,newbie to this,recently installed a new veritas r8 ,replacing an old optima system[which had no problems o... [Read more]
Mend optima zone mode
1

optima xm: can i change zone configuration in engineers mode without activa?

Have recently inherited an Optima XM system but now wish to make changes to the programmed zone configuration ... [Read more]
Mend Security Systems, Home Alarm Systems

pyronix home alarm?
Mend hot bit installed

hot to connect a deltabell plus to a scantronic 9200 panel?
Mend security systems alarm

how to wire a pyronix deltabell plus bellbox?
Mend sounder wiring help

Sounder wiring help!?
Mend light started service

Pyronix light flashing?
Mend pyronix deltabell bell

Pyronix Deltabell Plus Backlight fault?
Mend error message keys

Error Message K01 Excess Keys?
Mend going regular intervals

Pyronix sterling 10 help!?
Mend security system alarm tamper code

How do I fix tamper code on Paragon Pyronix alarm?
Mend intruder system battery

alarm goes off during night . no intruders?
Mend code change property

Code change?
Mend alarm keypad tamper

Deltabell Plus Backlight disable?

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Home Alarm Systems ...

Other models...

Pyronix Deltabell Plus

Related Categories

Mend Car Alarm Systems
Car Alarm Systems

Topic

Pyronix Accenta G4: Adding Sounder & Strobe