Hi. My Indesit washer-drier won't spin or tumble, ie the drum won't rotate (only by hand). I've checked the belt is OK and an engineer looked at the motor brushes and says they are fine. Can someone please tell me what the problem is likely to be, how to fix it, and how much it is likely to cost? Also, does anyone know how I get access to a wiring diagram on the internet for my machine (WDG1195WG)? Lastly, can I detach the PCB (module) without breaking anything, and if so how?!
Many thanks for any help!!
did you ever get the problem sorted? i have the same problem, fuse on the pwb looks fine.
stu cooper
December 2005
HI,
Sorry i cant help re your problem.
But maybe you can help me ?
I am looking for a copy of the Instruction Manual/Guide
for the INDESIT OMEGA 1100 (WDG 1195W)
Can you help ?
please send me an email to - patrick.obrien47@ntlworld.com
bye Patrick gw1sxn
Patrick O'Brien
June 2005
I had same problem. The fuse is probably blown on the controller board. Take out the connectors ( note where they go first) and slide the board up. Other than the fuse a few components may be burnt too.
The fuse may blow due to number of reasons. ( overloading, obstruction on the drum, faulty bearings etc).