My Beko washing machine allows water into the drum and the pressure switch seams to functions normally but at this point the timer seams to be asking the pcb to activate the motor to start the drum turning,this drum washing action does not happen.
Is the problem the PCB or motor brushes or is it something else.
could be either!
remove the motor and then unscrew the motor brushes from the side of the motor housing and check how long the carbon bit is.10mm or less and they need replacing.Also check the wiring loom to the motor for water ingress and burning
ck
September 2010
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix washing machines.