Recent: Safely remove screen protector from a Macbook Air?

Mend > Sewing Machines

Mend Elite RS200 CB Machine Thread Bobbin

how can I get my elite sewing machine to pick up thread from the bobbin?

I have an elite RS200 CB sewing machine that will not pick up thread from the bobbin, I have changed the needle, is there anything else I cna do?.

Mrs Jenner
November 2011
You may need to retime the machine either by shop repair or doing it yourself, this site does not allow email addresses to be shown but if you type my address as you say it not as you see it I will attach instructions if you email me.
Ken

kendourof at yahoo dot com
November 2011

Automatic Answer

We may have found other answers which could help you.

Click here for Machine Thread Bobbin

Related Questions ...

Mend sewing machine janome bobbin
1

I need to catch the thread on my sewing machine?

The thread isn’t being picked up by the hook underneath the bobbin Janome harmony 4035
Mend moving machine help sew
1

Bobbin thread not being picked up?

I see that the bobbin is not moving when I start the machine (the part below the bobbin - bobbin case is movin... [Read more]
Mend sewing machines bobbin
1

My CG 500/550 Singer Sewing Machine's bobbin isn't working?

Singer CG 500/550 Sewing Machine The needle does not pick up the thread from the bobbin. Prior to this happe... [Read more]
Mend sewing machine second
1

How can I tighten the drive belt(s) on my Frosted /Rossman64 sewing machine?

I acquired a second hand F/R 64, model no' 507, serial no' 5009293. An electrician friend helped oil, grease a... [Read more]
Mend sewing timing bobbin
2

Sewing machine 12116690?

I do not have a manual. The timing mechanism is off and bobbin thread will not pick up. Can you send me an e-m... [Read more]
Mend frister rossmann cub sewing
1

How can I get the right tension on my Frister Rossmann Cub 3?

I have a Frister Rossmann cub 3 sewing machine that hasn't been used for a while. I set it up to test and afte... [Read more]
Mend gear singer model
1

How can I replace the Top Vertical Shaft Bevel Gear for SINGER MODEL 248?

Hi The part holding the bobbin case in my Singer 248 stop moving. So the machine dead. ( can't take up the ... [Read more]
Mend sewing machine thread needle
1

Crown Point zig zag sewing machine?

The thread from the needle wont engage the thread from bobbin
Mend singer touch tronic 2010
2

singer touch tronic 2010?

I have done all these steps and my machine will still not thread the bobbin.I dont understand what I am doing ... [Read more]
Mend sewing machine needle alignment
2

Can anyone help with the Riccar Sewing Machine - Model 570 Super Stretch?

When the needle bar goes down, the needle doesn't pick up the thread from the bobbin. We've tried to shift the... [Read more]
Mend sewing machine bobbin thread
1

Sewing Machine-Singer Touch Tronic 2010?

The bobbin case won't wind. I've never had a problem with it before. It seems as if the thread is not catchin... [Read more]
Mend arm machine hello
1

long arm quilting machine?

Hello, I recently purchased a used long arm quilting machine. (Janome Artistic 18) I just had it all serviced... [Read more]
Mend sewing machine thread assembly
1

How can I remove the bobbin holder assembly of my 319k singer?

My old singer sewing machine has jammed. Thread is caught inside the assembly holder, I think that is what it ... [Read more]
Mend embroidery machine needle
1

How to reset timing on Bernette 340 embroidery machine?

I have an Bernina Bernette 340 deco embroidery machine. I desperately need instructions for resetting the tim... [Read more]
Mend sewing machine tension stitch
1

Tension/stitch problems with my Singer 201?

My Singer 201 sewing machine has been sewing beautifully - until today. For no apparent reason the bobbin stit... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Sewing Machines ...