you need to remove the five torx 50 bolts holding the wheel bearing to the hub carrier,look for the holes through the flange,the whole disc/hub then pulls out of the carrier then remove the five 13mm bolts holding the disc to the hub,watch the bearing removal from the carrier,these can be tight,and there is a puller for these but if you are renewing the disc then a large hammer can knock them out if they are tight.Clean up the carrier and bearing and grease on re assembly and they will be a lot easier to remove in the future.
cdc
August 2011
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix vans.