changing discs on a 2002 fwd transit diesel?

Thanks for the advice.Was worried about breaking something but several blows with the lump hammer and it was off.One side done,will do the other after my hols.
Thanks,Steve.

Steve.
April 2013

the bearing will be seized into the hub carrier,if you are changing the discs then you don`t need to worry about damaging them.A sledge hammer would be your best option and they usually start moving pretty quickly alternating left and right onto the discs,when off remove the five 13mm bolts holding the disc on and clean up the inner bearing and hub faces with emery,when re assembling apply copaslip or a/seize grease and if it needs removing again it will come apart no problem,good luck.

cdc
April 2013