How do you repressurise system?

read your instructions book if its a combi there should be a filling loop either a integral or basic external loop on the return pipe and cold domestic pipe looks like a steel braded hose with 2 flanges that screw onto 2 valves 1 on return and other on the cold domestic pipe going into the boiler conect both end and open screwdriver slot or tap to fill ,allways remove loop after filling , if its an integral loop then you will need a charging key e.g if its a worster boshe the key is normally under neth clipped onto a plastic cover normally white if so push key up integral loop turn 1/4 and slowley unscrew grey knob on right until pressure reaches 1 bar then bleed rads keeping pressure at 1 bar then shut off when all rads are full

rik
March 2011

Bicycle pump, stupid answer isn't it, that cos it's a stupid question. If people like yourself want a sensible answer to your questions, put a bit more thought into it, make our lives a lot easier, give us a lot more info and you won't get these sort of answers.

Pheasant Plucker.
March 2011