I have bought a replacment linkage/motor for my 206, 1.4s 05. i have removed the blades and knocked out the old splindles, but cannot work out how to get the actual motor/arms and linkage out, can't see any brackets in place, just looking to do a straight swap, any advice would be great thanks
pop the large washers off that are surrounding the spindles to uncover the 36mm nuts (under the scuttle panel trim). t 10mmhe linkage is bolted onto the bulkhead next to the brake servo. on petrol models you should b able t remove linkage by removing air box only
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix cars.