Love you guys thanks so much saved me a fortune am due to have baby in five weeks so didnt need added expense of a new washing machine . Gotta love the internet xxxxx
sonya
October 2017
Thank you Jon. These instructions helped me. Washing machine had stuck with a load of washing inside.
Fi
March 2017
I followed Jon Page's instructions from November 2011 and it worked.
Thank you very much, saved me a fortune.
Audrey, Edinburgh
December 2015
In australia my logic washing machine to clear error code is Put dial to spin, hold left options key, turn dial to drain, release left options key. Your machine should reset it self. My F43 error also turned out to be the bushes worn.
Simon
September 2015
Brushes on mine were worn to less than 1/2 inch.
Replaced and cleaned the black soot from the worn brushes.
Runs great now.
Thanks
Golf nut
January 2015
Jon Page thank you...you saved me today😄
Orla
January 2015
there is no spin button to press and hold
Marcus Rose
September 2014
motor brushes /hall sensor /associated wiring /control module
after any repair to the above do a reset as outlined perfectly in the post above
moonraker2
September 2014
The F43 error code by the Bosch washing machine answer from Jon Page is perfect. I followed it and got immediate results in less than 5 secs. cheers Jon.
Craig
August 2014
motor defect
jduith
May 2014
Motor or Circuit Board Fault. Try resetting circuit board first - knob to off (12 oclock), then down (6 oclock), press and hold spin, round to 9 oclock, wait 5 secs, release spin, knob to 12 oclock. should be reset.
If it doesnt work investigate wiring\board\motor.
Jon Page
November 2011
Motor or Circuit Board Fault. Try resetting circuit board first - knob to off (12 oclock), then down (6 oclock), press and hold spin, round to 9 oclock, wait 5 secs, release spin, knob to 12 oclock. should be reset.
If it doesnt work investigate wiring\board\motor.
Jon Page
November 2011
motor error...change 2 motor brushes # 605694
michele
July 2011
siemens error f 43
kian
February 2011
Controll the Heater.
honk4711
January 2011
I can answer this question...
What is Error F43 on a bosch logixx 8 washing machine?
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix washing machines.