check area around servo is not filled with water caused by blocked drain tube below battery
also check the plastic vac pipes for leaks or loose at its connection with vac pump
matt
December 2010
check your rear brakes are not binding onto the drums,i had similar problem and i just taped the drums on the inside with a rubber mallet,not a metal hammer
RL
Richard
December 2010
sounds like your servo has developed a leak to check it pump brake pedal up till har (engine off ) then whilst holding foot down on brake pedal keeping pressure on it start the car if servo ok pedal will drop if not either leak on sercvo or vac pump not sucking hard enough
howtomendit.com for free repair help, information and advice.
