Recent: Find the charger or how to convert the battery?

Mend Briggs & Stratton Lawn Mowers

Mend Garden Tools, Lawn Mowers
Find out how to mend it for free.
Ask Question
Mend Garden Tools, Lawn Mowers
Click here to mend Briggs & Stratton lawn mowers

Mend lawn mowers ...

Mend Garden Tools, Lawn Mowers
Recent

Mount field 725m ride on mower?

mount field ride on mower, when I turn the key, nothing happens, no click or anything, I thought it could be a... [Read more]
Mend Garden Tools, Lawn Mowers

Replacing pin for belt guard Ranch King Pro 14AT818H205?

how do I replace the pin for the belt guard on a Ranch King Pro lawnmower?14AT818H205. This pin broke at the e... [Read more]
Mend Garden Tools, Lawn Mowers
1

Flymo 330 turboglide?

can the brushes be replaced on a flymo 330 turboglide
Mend Garden Tools, Lawn Mowers

How can I get my scarifier to work?

I have a Qualcast 35 petrol driven lawn mower. I have changed the blade cassette for the scarifier cassette. ... [Read more]
Mend Garden Tools, Lawn Mowers

How do I remove the flywheel. Mountfield 1640h ride on mower?

Mountfield 1640h ride on mower. How do I remove the flywheel please ?
Mend Lawn Mowers

Mend > Lawn Mowers

Mend Briggs & Stratton Pro

6.5 HP Briggs & Stratton Low Oil Circuit?

I have a 3500 Watt Pro Classic standby generator. It has an Intek pro 206 engine and I could not start it. After a lot of investigation I traced the fault to the metal cased module attached to the side of the rewind housing. The unit has two wires attached, a grey one leading to the low oil plug/switch and a white one leading to the On/Off swith. The number painted on the module is 698451 4003. When I disconnected the module from the metal housing the engine started immediately implying that the module is shorting to earth. What does the module do and is it possible to buy a replacement?

David Rollin
September 2010
Briggs & StrattonGarden Tools, Lawn MowersBriggs Stratton Pro
the oil level is fine. In fact I eventually traced the problem to a faulty oil sensor module that was grounding the ignition

David Rollin
October 2010
you should replace it it tells you that the oil level is low....! and when it is will stop the engine. if you can't get the part leave it off and keep an eye on the oil level...!

B&S
September 2010
Mend Garden Tools, Lawn Mowers
Click here to mend Briggs & Stratton lawn mowers
Mend stop oil cyl

how do i stop flooding of carb into oil and cyl?
Mend Garden Tools, Lawn Mowers

How can I fix Mountfield Laser Omega 46 Lawnmower?
Mend lawn mower briggs stratton

lawn mower engine hunting?
Mend rear wheel forward

B&S quattro 40 rear wheel lock?
Mend re stratto 35

re briggs and stratto clasic 35?
Mend briggs stratton engine start fine

My Briggs & Stratton 10.5 engine will start but dies after about 15 mins?
Mend mower problem hard

Excessive Compression?
Mend starts short time

How to fix a problem with briggs&stratton hp407engine?
Mend run away engine

Run away engine?
Mend briggs stratton engine

lawn mower briggs and stratton classic 35?
Mend briggs install engine

Briggs mod 28B702 type 1154-E1?
Mend briggs stratton cleaned

my briggs and stratton 3.5hp starts up then cuts out straight away?

Other models...

Briggs & Stratton 10 HPBriggs & Stratton 15HPBriggs & Stratton 17 h/p PoulanBriggs & Stratton 21Briggs & Stratton 220Briggs & Stratton 287707-0224-01Briggs & Stratton 31P777Briggs & Stratton 407777Briggs & Stratton 8-32Briggs & Stratton HP470Briggs & Stratton Quattro 40Briggs & Stratton ZT 54

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.

Related Categories

Mend Chainsaws
Chainsaws
Mend Grass Trimmers
Grass Trimmers
Mend Hedge Trimmers
Hedge Trimmers
Mend Irrigation Systems
Irrigation Systems

Mend Garden Tools, Lawn Mowers
Click here to mend Briggs & Stratton lawn mowers

Try fixfault.com to fix lawn mowers.