How to remove pulleys to remove engine briggs 12.5 hp?
I want to remove the 12.5 hp Briggs & Stratton Model 28T707 Type 1154 EI engine from my Yard Pro riding mower, but the pulley prevents bringing the shaft up through the opening in the engine deck. I have already removed the mount bolt from the bottom. Does the pulley have a set screw or is it pressed on? Please advise. Thank you!
The pulley is located with a woodruff key....apply some WD40, wait for a while, then gently tap the pulley with a hammer whilst pulling it down - this usually works. Failing that, use a conventional 2 jaw puller with the crank bolt part of the way in, for the puller bolt to press onto.
John
March 2008
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
