Recent: Home max fs506x?

Mend > Motorcycles

Mend Piaggio Zip 50 Front Light Replaced

ive got no front and back light for a paggio zip 50 2002?

i had a starter fault with me paggio zip 50 2 stoke 2002 replaced stater relay fixed the problem ,now i got no front and rear lights working,indicators and brake light are working, checked light bulbs ok ,the wire leading to the on off switch for the lights no live feed, need help is there a separate fuse for the lights , only fuse i could find is aolcated next to the battery thats ok

tim jennings
September 2010
odd check the regulator rectifier connection and also check the plug coupler at the fan cover it carries the power for the ignitoj and also the lighting source coil,its a small squarish plug with a clip on the side of it take it off and make sure its not green and corroded inside put a bit of contact cleaner on it and clip it back together same with the reg/rec coupling.

adam bike doctor
September 2010

Automatic Answer

We may have found other answers which could help you.

Click here for Front Light Replaced

Related Questions ...

Mend 60 green light
2

Halstead Hero 60?

hero 60 will ignite & run with green light flash 5 seconds then remains on..locks out afet 5 mins, just replac... [Read more]
Mend boiler pcb overheat
1

Worcester 28i junior, water temperature is far too hot?

Water temperature is nearly boiling not responding to temperature adjustment on front of boiler I've replaced ... [Read more]
Mend vauxhall vectra sri
1

Vauxhall vectra Sri elite3.2 2004?

When turning left abs and traction light comes on.replaced left front wheel bearing sensor kit,now on constant... [Read more]
Mend alarm set veritas
4

Alarm won't set?

Replaced the veritas 8 with new version, replacing wires identically. Completed walk test and bell test all ok... [Read more]
Mend problem ford front
2

Electric Problem on a Ford 2000 tractor?

I've replaced the front and back wire harnesses, ignition switch, light switch, voltage regulator, and intrume... [Read more]
Mend oven cooker element
1

No power to Oven, Clock, Light?

Hi I have a hotpoint SY36W fan assisted oven, The oven element had blown which i have now replaced, but now wh... [Read more]
Mend battery green light
2

Veritys8?

Battery replaced now and green power light on, still won't work, no sensers blinking and no noise when I open ... [Read more]
Mend 2001 working work
4

Peugot 306 (2001) Fog Lights not working??

Hey, I have a 306 2.0 HDI and I cannot work out why the front fog lights will not work?? I have replace... [Read more]
Mend blew replaced power
1

megane elctrical?

front o/side h/light blew. replaced bulb to find no power to plug any sugestions please
Mend television repair picture tube
1

How do I get my JVC Modle: HD 52866 to turn back on?

I replaced a picture tube in it and it will power up and then go back off again. :-( The light on the front b... [Read more]
Mend worm light pressure
1

Glow Worm 35f Fuel saver won't light main burn?

I have an old glow worm 35f fuel saver, positive pressure boiler. The pilot lights intermittently but won’t ... [Read more]
Mend front lights replaced
1

Brake light earth ?

When I put my foot on the brake the dash light dims and the front dip lights come on I have replaced the switc... [Read more]
Mend washing machine pcb door lock
2

how can i fix my hotpoint ultima wt761g?

when i load up my machine and hit the start button the door locked button on the display does not light up so ... [Read more]
Mend Vaillant Heating Fault
1

Update of Vaillant VCW GB 282 EH fault?

The above Boiler last night for some reason stopped working, due to its age theres only 1 power light on the f... [Read more]
Mend problem 50 power
1

problem fixing lights on piaggio nrg 50 power dt?

I replaced rear brake unit and now all i have brake light when i press brakes but no front or back light pleas... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Motorcycles ...