Mend > Lorries/Trucks

Replacing manual dieasal lift pump on 811 ford cargo?

help!,i have a new manual dieasal lift pump,the type you prime with your thumb,it's held by two bolts,i know how to connect up the fuel lines,but the pump?,can i just unbolt,remove and slide new pump in place,is it that easy????,help!,just want to start engine again,thanks

jason
August 2010

Ford Vehicles, Lorries/Trucks Manual Pump Ford

Just Bolt it on then prime the engine bleed valve on top of twin filters then on the injection pump (very small 8mm bolt be carefull not to over tighten....Might have to slacken one of the injector pipes to get it going..... paul horseboxrepair.com

horseboxrepair.com
September 2010

Automatic Answer

We may have found other answers which could help you.

Click here for Manual Pump Ford

Click here to mend Ford lorries/trucks

No electrics?

Ford cargo only one air tank filling ?

How can I replace my front wing on Ford Transit Van?

red diesel?

1986 ford cargo 0811 does it have cv joints?

How do I know if I have a radiator problem?

Ford cargo 813 ?

Ford cargo workshop manual?

wont start?

ford cargo 1986?

Oil filter?

ford cargo 813 power steering noise?

Other models...

Ford Cargo 811 Ford Cargo 813

Mend Ford Lorries/Trucks

Related Categories

Mend > Lorries/Trucks

Replacing manual dieasal lift pump on 811 ford cargo?

Automatic Answer

Replacing manual dieasal lift pump on 811 ford cargo?

I can answer this question ...

Replacing manual dieasal lift pump on 811 ford cargo?

Other models...

How to mend ...

Mend lorries/trucks ...

Daf LF 45 2006 euro 3/4?

Daf cf?

Cargo/stralis?

Daf cf 85 euro3 2001?

Daf cf85 euro 3?