Recent: Home max fs506x?

Mend > Motorcycles

Mend Peugeot V-Clic Carb Throttle

idle adjustment peugeot v clic?

do you adjust the idle via the throttle cable at the carb end or is there a spacific idle screw on the carb, im only asking because the idle speed seams to fluctuate . carb diaphram ok , valve clearances ok, does not seam to have any air leaks
any help appreciated

ronb1967
July 2010
the tickover screw is on the carb it butts up against the cables guide wheel(gold colour)basically screwing it inwards make the tickover go up and out down.remember this bike is chinese not french so a fluctuating tickover speed is not uncommon its due to the weakness of the fuel air mixture and a slight increase in pilot jet size will settle the problem out.its the same bike as a baotian bt50qt/and starway bt50qt but has nicer lamp lenses on it and cost a fair few quid more.

adam bike doctor
July 2010

Automatic Answer

We may have found other answers which could help you.

Click here for Peugeot Carb Throttle

Related Questions ...

Mend exhaust variator speedfight
2

upgradeing my bike ?

my bike is standard speed fight 2 50cc and the only thing i done is adjusted me throttle in the carb now i get... [Read more]
Mend Peugeot Scooter Speedfight
5

How can I fix my 56 plate Peugeot Speedfight 2?

I purchased my moped in October and it ran perfectly, for a month or so... then i started to need more revs f... [Read more]
Mend Peugeot Scooter Carburetor
1

peugeot speedfight 2 problem, help?

i am having problems with it running, it runs for like 5 minuets then you just get no throttle response at all... [Read more]
Mend throttle start bike
1

speedfight throttle problem ?

hi i took my carb off my speedfight 2 to clean it and put it back together and now i have no throttle and whe... [Read more]
Mend engine speedfight 50cc
2

excessive high revs when engine starts?

Hi I have just rebuilt a speedfight 50cc moped, new crankshaft bearings seals etc new barrel and piston, when ... [Read more]
Mend sudden fuel start
4

Peugeot Ludix Carburator problem?

All of a sudden, after winter storage but with new fuel, difficult to start and will only idle. Starves and su... [Read more]
Mend speedfight 50cc help
2

speedfight 2 50cc?

hi any one that can help me ive had a lot of trouble with my bike the main trouble i have now is that it dosnt... [Read more]
Mend problem 1998 start
1

speedfight running problem?

i have a speedfight 2 100cc 1998 model i was rideing it and it back fired and cut out and didnt start again i ... [Read more]
Mend peugeot 50cc cuts
1

Peugeot Speedfighter 50cc LC Throttle sticking?

Hi my speedfighter now & again cuts out but will restart after about 1min. Also today my throttle stuck open. ... [Read more]
Mend will start wont rev up
3

speedfighter will start but wont rev up ?

i have 2 w reg water cooled speedfighters one was stolen recoverd but the ignition was ripped apart the other ... [Read more]
Mend speedfight 100cc throttle
3

how to fix my peugeot speedfight 2 100cc 98?

my scooter will go up to about 55mph and then it cuts out and when i losen the throttle it idles and goes agai... [Read more]
Mend speedfight out loss
1

Pergout speedfight 100cc 2004 keeps cutting out as im riding?

i have a speedfight 2 its a 100cc and 2004. it seems to tick over perfect fide around perfect but when i do th... [Read more]
Mend start throttle started
2

how can i fix my peugeot speedfighter 2?

it wont start and when it does if u pull back on the throttle it goes dead. i took the carb off and it had wat... [Read more]
Mend cutting going cut
1

why is my speedfight 2 cutting out?

i have a 06 speed fight 2 i was recently going up hill and my bike just cut out it starts after it but then it... [Read more]
Mend speedfight fight going
1

why is my speedfight 2 cutting out?

i have a 06 speed fight 2 i was recently going up hill and my bike just cut out it starts after it but then it... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Motorcycles ...