Hi I have just rebuilt a speedfight 50cc moped, new crankshaft bearings seals etc new barrel and piston, when engine starts is revs to full capacity, I have checked the throttle cable and cleaned the jets in carb
i expect you have put the throttle slide in around the wrong way,take it out and check that the cut out at the bottom near the needle is facing the air filter when it in.also a carb being loose or a leaking gasket on the manifold will cause this problem.if the throttle has alot of play then the slides in the wring way.
adam bike doctor
July 2010
is slide in carb sitting right down? is tickover screw. screwed out enough.
rayb
July 2010
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix motorcycles.