Recent: Safely remove screen protector from a Macbook Air?

Mend > Digital Cameras

Mend Vivitar 3945S Dead Mains Battery

Dead Vivitar vivicam 3945s?

After the original mains adapter burned out, and i could neither re-charge the battery or use it plugged into the mains, the previously fully working camera sat around for a few months until i purchased a new adapter for it. This adapter came from the same re-seller as the original, Sunny UK, but they had to supply me with an equivalent onto which they spliced my original socket. When i plug it in, the red charging light comes on on the camera, presumably telling me its receiving power correctly but there is no other sign of life from the camera! Could it now be the battery is just too flat to hold enough charge, it was never up to much even before (650mAh) or is it that the charger is somehow wrong or maybe a fuse or dust? It must be something fairly fundamental as it simply doesnt do a thing (even when plugged in and showing a red led) but i'd rather repair it and give it a new lease of life than chuck it away. Please help!

Chris Newman
June 2010

Automatic Answer

While you wait for answers, we may have found some information which could help you.

Click here for Dead Mains Battery

Related Questions ...

Mend security system battery
1

Cooper Scantronic 9448 alarm?

Have a Cooper Scantronic alarm system . Instruction book say 9448+ but front of small control box by entry is ... [Read more]
Mend security system control panel battery
1

CEF AP28 alarm issue?

My CEF AP28 alarm control panel "24" light came on the other night and was beeping. We entered the code and th... [Read more]
Mend How to mend it?
3

Standy by battery on Horstmann H37 XL Progammer?

I have a Horstmann ChannelPlus H37 Series 2 Three Channel Programmer. Instructions state it has a non-recharg... [Read more]
Mend problems power cut
1

i-on 16 ?

i am having problems after a power cut i am getting 'panel A/C fail' i have gone into the main consumer unit a... [Read more]
Mend battery house installed
1

Vertitas 8C alarm - internal battery keeps dying?

Hi I have a Veritas 8C alarm in my house which was installed prior to moving into the property 4 years ago. ... [Read more]
Mend security system battery
1

how can i fix my alarm its a melcom st6500?

Have replaced battery and it did work for a day but is now completely dead but I noticed on the set panel wher... [Read more]
Mend hello hope kind help
14

Tunstall 2500 ?

Hello all, hope some kind soul can help? I have major problem with it before and following a battery replac... [Read more]
Mend power light keypad
1

No mains power light to my keypad?

i have a scantronic 9800 Micro processor intruder alarm originbal fault was faulty battery back up so i change... [Read more]
Mend alarm system security system battery fault
4

gardtec 800 alarm system reset?

I have a gardtec 800 series alarm system. This was installed by the previouse house owner. Last night the inte... [Read more]
Mend security system battery
1

how can i fix scantronic9448+ alarm?

I turned our alarm off at the mains(circuit breaker) about 2 years ago as the cat was tripping it at night....... [Read more]
Mend fault currently installed
6

Gardtec 500 Alarm Fault?

I currently have a Gardtec 500 alarm installed which is now at least 10 years old. This morning the alarm star... [Read more]
Mend mains power dead
3

veritas 8 goes off when mains power goes off?

does this mean battery is dead (20 years old).There is no low battery indication or bleeping.Do I need any spe... [Read more]
Mend security alarm system
3

why is my keypad dead when i cut main supply?

have just fitted texecom veritas alarm, had no problem whatsoever until today, had to cut mains supply and whe... [Read more]
Mend compact power switched
4

SL8 Compact Dead keypad?

The power was switched off for over 24hrs to my property whilst I had some work done. When the power came back... [Read more]
Mend power sounder reset
3

how do i reset the strobe on my alarm?

I accidently set my alarm (accenta g3)off on sat, this was quickly stopped using the code. no probs, so i thou... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Digital Cameras ...

Other models...