Mend > Dishwashers

Mend Fisher & Paykel DD603 Dishwasher Drawer

Fisher Paykel DD603 LCD panel ?

The top drawer LCD panel will not change program from the Normal setting. The program does not run either just a double beep. Bottom drawer working fine. Any help?

AndyS
May 2010

Fisher & Paykel Fisher & Paykel DD603 Kitchen Appliances, Dishwashers Dishwasher Drawer Fisher Paykel

Take the front panel off and on the top right hand corner is the control module. On the right hand side edge of the module is an LED light which shines through a plastic lense then is redirected by a prism & bounces back through a second plastic lense to a receiver on the module. If drawer is not closed or the lense or the prism is out of alignment it will think that the drawer is open. Had one once where the module case was broken putting the light out of alignment with the lense.

Lincoln Appliance NZ
May 2010

Thanks for your response. there doesn't seem to be a door closed LED symbol on this machine but I'll take the front panel off and see what that gives me.

AndyS
May 2010

Sounds like the 2 beeps means it thinks the drawer is not closed. Check the door closed LED & prism on top right corner of front panel. Take the front panel off the drawer to get a good look at it.

Lincoln Appliance NZ
May 2010