how do I take the back off of my Kenmore 80 series washer?
I know what part is broken because unfortunately it has broken before but I can't remember how to get the back off to get in there to replace it.
It is model # 20872990
Trina, remove the 2 plastic caps on the ends of the control panel and then remove the 2 screws located on the panel and lift up the control panel (unplug unit first for safety)finally pop out the 2 clips using a flat blade screwdriver, remove cabinet. Observe how the cabinet comes off, if put on wrong washer will be very noisy in spin cycle. good luck!!!
Kevin
March 2006
Automatic Answer
We may have found other answers which could help you.