Recent: Will I need to replace my garden tap?

Mend > General D.I.Y

Mend Silavent CUR7003 Circuit Board Motor

silavent extractor fan?

how can i tell if the circuit board or the motor has burnt out on a silavent cur7003 extractor fan ??

trev
December 2009
For 230v models (see sticker)

Unscrew the motor wires from the circuit board and press them against the L & N terminals where the supply enters the extractor unit. If it doesn't turn, it's burned out.

Alternatively check the motor for continuity with a multimeter. If the motor checks out OK, then suspect the circuit board. One assumes that you have checked power to the extracter using a test lamp or multimeter.

Mal
December 2009

Automatic Answer

We may have found other answers which could help you.

Click here for Circuit Board Motor

Related Questions ...

Mend starter motor citroen
1

Wiring to relay between fuse and starter motor?

Hi Can anyone tell me the wiring details on how to fit a new relay between fuse board and starter motor, I ha... [Read more]
Mend start help model
2

Extractor Fan won't start without manual help?

I have a De Dietrich extractor fan. Model # is DHD365XP11 The motor will not start by itself but if I give th... [Read more]
Mend heat surge turn
1

Trouble shooting Heat Surge M6?

Hello. When I turn my Heat Surge on it beeps. This is to let you know that you are getting power to the unit... [Read more]
Mend washing machine motor circuit board
1

Tried to reset my beko 5140 washing machine but the drum is not working?

I have a beko 5140 washing machine. I have tried to reset to test all the functions. It fills up with water bu... [Read more]
Mend bissell pro turbo
1

bissell tubor brush moter?

Bissell pro heater model 9400e turbo brush motor has power in positive no negative which comes from a circuit... [Read more]
Mend dryer off button
1

CTD00 tumbler dryer stops as soon as I release the on/off button?

Hi, I have a hotpoint tumble dryer, model CTD00, it has recently stopped working. The tumble dryer only works ... [Read more]
Mend How to mend it?
1

Where can I locate a Pfaff 7550 motor circuit board?

I have a Pfaff 7550 that has a bad motor circuit board. I have looked online without success. Where can I obt... [Read more]
Mend refrigerator cooling motor
1

why does my evaporator fan motor not run on my Samsung Refrigerator RS2556S?

Samsung side by side model # RS2556SH. The evaporator core freezes up and the refrigerator stops cooling. Free... [Read more]
Mend zanussi spin drain water
2

zanussi electrolux aquacycle 1000 f1045w?

It wont spin or drain water fully.I have checked the pump it is running ok.The pipes are all clean to the pump... [Read more]
Mend hotpoint ultima problem
2

Motor Short on Hotpoint WT960P?

5 year old Hotpoint Ultima WT960P washing machine. Problem started with an F-01 (short circuit motor triac) fa... [Read more]
Mend washing machine motor circuit board
1

Repair Beko wm652s?

My washing machine has stopped mid cycle. There is all the relevant clicking as though the drum is about to st... [Read more]
Mend f p dishwasher
1

DW691 F & P dishwasher?

Fills with water but does not start wash cycle - counts down no error messages show. Pump motor working, filte... [Read more]
Mend washing machine clogging filter
1

How do you reset a Neff Washing Machine Program?

I have a NEFF W5320 X0 GB Washing Machine that appears to be stuck in Drain Mode. It came about after clearin... [Read more]
Mend start set hit
1

True treadmill 500. Wont Start?

You can set everything on pedestal and when you hit start, nothing happens. Removed pedestal everything is con... [Read more]
Mend zanussi washer dryer error code
2

Zanussi WJS1665W Washer Dryer - Error Code E52 - help?

I am running the Engineers Diagnostic mode & gtting this error code - E52. I have seen that this may be "no... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend General D.I.Y ...