if you find the flaher relay there will be two terminals on it its more likeley to be black and square on this machine,take the two wires off and put a split pin between the two spade termials to basically join the two wires up temp,then turn the ignition on and see if the indicators light up if you push the switch over to left or right if it lights up but doesnt flash then the problem i the relay(buy a new one) if it doesnt light upat all then repost the question and ill answer again
adam bike doctor
December 2009
thanks for that.
julie
December 2009
All the indicators?
Check all other electrics to see if everything else works ok.
Check all bulbs.
There is an indicator unit near the battery, generally barrel shape and silver. replace this. Connected by two or three wires that yo just pop off. Should be able to buy a pattern part in most bike shops, cheaper than original
bb
December 2009
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix motorcycles.