Recent: Home max fs506x?

Mend > Home Heating Systems

Mend Baxi 105E Boiler Ignition Solenoid

Baxi 105E Combi Boiler (18 months old only), continuous ignition failures?

What's the cause ? Symptoms:
1. Flame failure after 5 - 10 minutes, followed by:
2. Failure to be able to reset (sounds like a solenoid is being energised, followed by relay tripping out
3. The 'flame failure' and 'fan failure' fault lights coming on.

Chris Sherman
March 2006
Without being stood infront of it and watching its difficult to give an accurate suggestion to be fair. From what you are describing it could possibly be a fault on the heating thermister as I have had this once before but cant remember which fault lights it displayed on the front for the life of me. I am pretty sure though that it tells you the fault codes on the drop down panel on the front of the boiler. iirc it was listed as a sensor fault.

HTH

Andy the gas man
March 2006

Automatic Answer

We may have found other answers which could help you.

Click here for Boiler Ignition Solenoid

Related Questions ...

Mend worcester boiler minutes
2

Worcester Danesmoor 12/19 Oil Boiler Trip?

After several minutes of running the boiler trips. Manually resetting allows the boiler to begin it's purge cy... [Read more]
Mend boiler heating ignition
2

ignition to full flame problem?

hello my boiler will get to the ignition stage, pilot comes on. it carries on sparking but does not go to full... [Read more]
Mend ignition pcb red light
1

Potterton Suprima 50 - Pilot won't light?

Lovely flashing red light after three or so attempts by the boiler to re-light the pilot. Reset just restarts ... [Read more]
Mend boiler gas valve fault
2

hOW TO GET MY BOILER TO LIGHT EVERY TIME?

POTTERTON PROFILE 80E. WHEN THERE IS A DEMAND FOR IT TO LIGHT THE IGNITION PILOT LIGHT IGNITES AND THE MAIN... [Read more]
Mend vaillant boiler gas solenoid
1

how can i fix my vaillant vcw-gb-280h boiler?

i have no gas solenoid ignition there is no voltage to the soleniod in ch mode or dhw mode .All stats test ok ... [Read more]
Mend boiler fault ignition
3

potterton Performer 24 is faulty?

My potterton boiler will not fire up the red light comes on stating no flame, have replaced the Pcb card with ... [Read more]
Mend vaillant boiler turbomax
2

How can I fix my Vaillant Turbomax 242E heating boiler?

My faithful Vaillant is now 10yrs old with a couple of parts changed over the years, divertor Vv and clock if ... [Read more]
Mend boiler ignition solenoid
1

C/H boiler Potterton Neataheat Mk2?

On start-up the fan starts-up and shortly after there is a click as I presume a solenoid Closes but there- aft... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Home Heating Systems ...