Recent: Will I need to replace my garden tap?

Mend > Tumble Dryers

Mend Fisher & Paykel DE08-US1 Dryer Work Setting

fisher and pykel de08-us1?

our dryer will only work for (depending on temp setting) 10 -30 minutes I have replaced the lent fliter, and cheecked the fuses with an ohm meter all apperar to have contnuity. the dryer just shuts off after a while seems to be working fine while its working, but will shut off and then not start for a little time after.

Bill
October 2009
Something is obviously overheating. When it cools down it will run again. The fuses have nothing to do with a fault like that, they either work or they are blown. Not familiar with this model but would suggest you check motor to see how hot it feels when the dryer stops because it probably has a thermal cutout in it. Failing that look for an overheat thermostat & check if it has continuity at time that dryer stops. Look for any airflow restriction which may be causing it to overheat.

Lincoln Appliance NZ
October 2009

Automatic Answer

We may have found other answers which could help you.

Click here for Dryer Work Setting

Related Questions ...

Mend heat replaced switch
1

why does my white knight tumble dryer only work on high heat setting??

ive replaced the heat switch and its made no difference still the same.
Mend tumble work works
1

white knight WK427 tumble dryer?

Hi my tumble dryer does''nt work on the low setting, but works on high setting.what could be the problem?
Mend bosch tumble dryer repair
1

how can I fix my Bosch condensing tumble dryer?

I have a \bosch condensing tumble dryer. All the lights work for every setting but it wont start. Any ideas as... [Read more]
Mend condenser dryer instructions three
1

Creda Excel Eco Condenser Tumble Dryer T602cw?

This dryer was given to me but without the instructions. There are three presets on the dial which all work bu... [Read more]
Mend zanussi condenser tumble
1

Zanussi TC484W condenser dryer....trips electric ?

Zanussi TC484W condenser dryer....trips electric when put onto the cotton setting....other setting work fine..... [Read more]
Mend tumble dryer no heat element
2

How can I fix my White Knight WK767 condensor tumble dryer?

My tumble dryer is working ok but has no heat (on high or low setting), I have checked the element and this se... [Read more]
Mend tumble dryer replacement broken
1

White Knight WK427?

Can anyone help. We've got a White Knight WK427. The dryer operates fine but the plastic control knob on the ... [Read more]
Mend aquarius dryer work
1

Hotpoint Aquarius CTD40 tripping electrics?

The dryer may work for a couple of minutes then trip out all the electrics in the home. After re-setting, the ... [Read more]
Mend really motor part 3
1

Is it really the motor, Part 3?

Thanks again JP! I sure wish I had 1% of your knowledge about these things! Actually he never did mention any ... [Read more]
Mend tumble dryer white knight heat settings
2

Why does my white knight (WK447) tumble dryer only work on high heat?

We have a White Knight tumble dryer (WK447 Sensordry) with 2 heat settings. The low heat setting does not hea... [Read more]
Mend motor cycle works
2

How dwq I fix my Moffat dryer?

The timer motor does not run on the automatic cycle, so the dryer wil run continuously. The timer works fine o... [Read more]
Mend dryer cycle sensor
1

Whirlpool dryer doesn't finish cycle?

I've looked at whirlpool related questions but haven't found someone with a similar problem. At first, the... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Tumble Dryers ...